CAUTION - RISK OF FIRE This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
These fixtures are intended to be installed utilizing NEC compliant junction boxes. This product is safety listed for damp locations.
Use minimum 90°c supply conductors.
For a complete list of dimmers, visit out website at www.Feiss.com
1A 4
KNURLED NUT TOP COVER
1
ALLEN WRENCH SET SCREW
PENDANT ARM
BOTTOM COVER
1 3
1
Install the pendant arms into the fixture and use an Allen wrench to secure them in place with the provided set screws from the top and bottom.
2
Install the top cover on the pendant and secure it in place with the knurled nut.
3
Screw the bottom cover onto the bottom of the pendant.
4
Follow enclosed supplement installation instructions for electrical and fixture installation onto junction box.
1
1.0
MISE EN GARDE - RISQUE D'INCENDIE Ce produit doit être installé selon le code d’installation pertinent , par une personne qui connaÎt bien le produit et son fonctionnement ainsi que les risques inhérents
Les fils d’alimentation doivent convenir pour 90°c.
1A 4
ÉCROU MOLETÉ COUVERCLE SUPÉRIEUR
1
CLÉ ALLEN VIS DE RÉGLAGE
BRAS DE LUMINAIRE
COUVERCLE INFÉRIEUR
1 3
1
Installez les bras pendants dans le luminaire et utiliser une clé Allen pour les fixer en place avec l'ensemble des vis fournies par le haut et le bas.
2
Installez le couvercle supérieur sur le luminaire et fixer en place avec l'écrou moleté.
3
Vissez le couvercle inférieur sur le fond du pendentif.
4
Suivez les instructions d'installation de suppléments fermés pour l'installation électrique et appareil sur une boîte de jonction.
2
ADVERTENCIA - RIESGO DE INCENDIO Este productor debe ser instalado segun el codigo de instalacion aplicable por una persona que conozca la constussion y el funcionamiento del producto y los riesgos que supone.
Conductores de alimentacion 90°c Min.
1A 4
TUERCA MOLETEADA CUBIERTA SUPERIOR
1
LLAVE ALLEN TORNILLO
BRAZOS DE LA LÁMPARA
CUBIERTA INFERIOR
1 3
1
Instale los brazos de la lámpara en la luminaria y el uso de una llave Allen para asegurarlos en su lugar con los tornillos de ajuste previstas en la parte superior e inferior.
2
Instale la cubierta superior en el colgante y seguro en su lugar con la tuerca moleteada.
3
Atornille la cubierta inferior en la parte inferior de la pendiente.
4
Siga las instrucciones de instalación de suplementos cerrados para la instalación eléctrica y el accesorio sobre la caja de junctura.
3
SAVE THESE INSTRUCTIONS!
7400 Linder Ave, Skokie, IL 60077 800.323.3226 - 847.626.6300
Feed the fixture wires through the canopy and screw the canopy onto the ... the electrical box and/or canopy, then place the canopy onto the mounting plate and ...
Place the shade onto the socket and secure it in place by screwing the collar nut onto the socket using the shade tool. Repeat for remaining shades. Screw the ...
NOTE: The important safety precautions and instructions appearing in the manual are not meant to cover all possible conditions and situations that may .... able to support the fan, you are now ready to hang your fan. Grab the fan firmly with two ...
Cleaning Instructions. Use a soft damp cloth, with soap or neutral detergent. Do not use alcohol or other solvents. Aislamiento básico más aislamiento reforzado.
Be careful not to lose any small parts necessary for installation. ... design of our products at any time as part of the company's continuous improvement program.
Consulte la etiqueta del enchufe de la lámpara para obtener información Max de ... Fije la placa de montaje a la caja eléctrica con dos tornillos de la placa de ...
CAUTION - RISK OF FIRE. This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved. Use minimum 90°c supply conductors. SHADE. TO
Frontage 1 Light Pendant. 1.0. P1369_P1370. Pendant. P1369, P1370. G. P. I. : ENERAL RODUCT NFORMATION. This product is listed by one of the following.
Fije la placa de montaje a la caja eléctrica con dos tornillos de la placa de montaje. Pasar los cables de la lámpara a través de los tallos y atornille el tallo para ...
Use minimum 90°c supply conductors. MOUNTING. PLATE SCREW. DRIVER. 6 ... familiarizada con la construcción y operación del producto y los riesgos que ...
NEC junction boxes. This product is safety listed for damp locations. Screw the lamp into the socket. Refer to the label on the socket for Max Wattage Information.
Instale los tubos de velas sobre cada enchufe. Instale los seguidores del tubo de la vela en la parte superior de los tubos de la vela. Atornille las bombillas en ...
Install the diffuser into the shade. 1. 2. 1A. CAUTION RISK OF FIRE. -. This product must be installed in accordance with the applicable installation code by a ...
... fixture by feeding the cord through the canopy and moving the cord up or down. ... Neatly place all the wires into the junction box, place the canopy onto the ...
Connectez le fil bleu de conducteur au fil blanc de luminaire avec un écrou de fil. Connectez le fil rouge de conducteur au fil noir de luminaire avec un écrou de ...
Follow enclosed supplement installation instructions for electrical and fixture installation onto house outlet box. Screw the lamp into the socket. Refer to the label ...
P1299. Pendant. P1299. G. P. I. : ENERAL RODUCT NFORMATION. These fixtures are intended to be installed utilizing NEC compliant junction boxes. This product is safety listed for dry locations only. This product may be dimmed with a standard incandesc
Place the shade over the socket, then secure it in place by tightening the collar nut. Screw the lamp into the socket. Refer to the label on the lamp socket for Max ...
System is intended for installation by a qualified electrician in accordance with the National Electrical Code and local regulations. -. Go to the main fuse box, ...
System is intended for installation by a qualified electrician in accordance with the National Electrical Code and local regulations. -. Go to the main fuse box, ...
Install a quick link onto the chain and fixture loop, then install another quick link to the other ... place the canopy onto the mounting plate, and secure it in place by.
Port Washington, NY 11050. Central Distribution Center. 1600 Distribution Ct. Lithia Springs, GA 30122. Western Distribution Center. 1750 Archibald Avenue.
