Documento no encontrado! Por favor, inténtelo de nuevo
Corinne Globe Pendant Small
Instale los tubos de velas sobre cada enchufe. Instale los seguidores del tubo de la vela en la parte superior de los tubos de la vela. Atornille las bombillas en ...
Pendant GENERAL PRODUCT INFORMATION: This product is listed by one of the following “Nationally Recognized Testing Laboratory” This product is suitable for dry locations only.
CAUTION - RISK OF FIRE This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
This product may be dimmed with a standard incandescent dimmer.
Use minimum 90°c supply conductors.
This instruction shows a typical installation.
1A 2
1
FRAME
5
LAMP
4
CANDLE FOLLOWER CANDLE TUBE
3 SOCKET
SOCKET ASSEMBLY 1
Feed the cord through the frame and fixture loop, then screw the socket assembly to the frame.
2
Follow enclosed supplement installation instructions for electrical and fixture installation onto the junction box.
3
Install the candle tubes over each socket.
4
Install the candle tube followers on top of the candle covers.
5
Screw the lamps into the sockets. Refer to the label on the lamp socket for Max Wattage information.
1
1.0
MISE EN GARDE - RISQUE D'INCENDIE Ce produit doit être installé selon le code d’installation pertinent , par une personne qui connaÎt bien le produit et son fonctionnement ainsi que les risques inhérents
Les fils d’alimentation doivent convenir pour 90°c.
1A 2
1
CADRE
5
AMPOULE
4
ADEPTE DE BOUGIE TUBE BOUGIE
3 DOUILLE
ENSEMBLE DOUILLE 1
Faites passer le cordon à travers de cadre et la boucle de luminaire, puis visser l'ensemble de douille sur le cadre.
2
Suivez les instructions d'installation de suppléments fermés pour l'installation électrique et appareil sur une boîte de jonction.
3
Installez les tubes de bougie sur chaque douille.
4
Installez les adeptes du tube de bougie sur le dessus des tubes de bougie.
5
Visser les ampoules dans les douilles. Reportez-vous à l'étiquette sur la douille de le luminaire pour obtenir des informations de Max Puissance.
2
ADVERTENCIA - RIESGO DE INCENDIO Este productor debe ser instalado segun el codigo de instalacion aplicable por una persona que conozca la constussion y el funcionamiento del producto y los riesgos que supone.
Conductores de alimentacion 90°c Min.
1A 2
1
MARCO
5
BOMBILLA
4
SEGUIDOR DE VELA TUBO DE VELA
3 ENCHUFE ASAMBLEA ENCHUFE
1
Pase el cordón por el marco y bucle de la lámpara, luego atornillar la asamblea de enchufe a el marco.
2
Siga las instrucciones de instalación de suplementos cerrados para la instalación eléctrica y el accesorio sobre la caja de conexiones.
3
Instale los tubos de velas sobre cada enchufe.
4
Instale los seguidores del tubo de la vela en la parte superior de los tubos de la vela.
5
Atornille las bombillas en los enchufes. Consulte la etiqueta del casquillo de la lámpara para obtener información Max Potencia.
Feed the fixture wires through the canopy and screw the canopy onto the ... the electrical box and/or canopy, then place the canopy onto the mounting plate and ...
Consulte la etiqueta del enchufe de la lámpara para obtener información Max de ... Fije la placa de montaje a la caja eléctrica con dos tornillos de la placa de ...
CAUTION - RISK OF FIRE. This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved. Use minimum 90°c supply conductors. SHADE. TO
Frontage 1 Light Pendant. 1.0. P1369_P1370. Pendant. P1369, P1370. G. P. I. : ENERAL RODUCT NFORMATION. This product is listed by one of the following.
Fije la placa de montaje a la caja eléctrica con dos tornillos de la placa de montaje. Pasar los cables de la lámpara a través de los tallos y atornille el tallo para ...
NEC junction boxes. This product is safety listed for damp locations. Screw the lamp into the socket. Refer to the label on the socket for Max Wattage Information.
Install the diffuser into the shade. 1. 2. 1A. CAUTION RISK OF FIRE. -. This product must be installed in accordance with the applicable installation code by a ...
... fixture by feeding the cord through the canopy and moving the cord up or down. ... Neatly place all the wires into the junction box, place the canopy onto the ...
1 may. 2012 - Pitches-Strikes: F Baez 79-49, S Rivera 89-56. Groundouts-Flyouts: F Baez 3-3, S Rivera 4-2. First-pitch strikes-Batters faced: F Baez 11-20, ...
Connectez le fil bleu de conducteur au fil blanc de luminaire avec un écrou de fil. Connectez le fil rouge de conducteur au fil noir de luminaire avec un écrou de ...
Follow enclosed supplement installation instructions for electrical and fixture installation onto house outlet box. Screw the lamp into the socket. Refer to the label ...
P1299. Pendant. P1299. G. P. I. : ENERAL RODUCT NFORMATION. These fixtures are intended to be installed utilizing NEC compliant junction boxes. This product is safety listed for dry locations only. This product may be dimmed with a standard incandesc
Place the shade over the socket, then secure it in place by tightening the collar nut. Screw the lamp into the socket. Refer to the label on the lamp socket for Max ...
Rigidez elástica: • Rigidez edométrica: • Relación − hiperbólica para primera carga triaxial: • Fluencia al corte con endurecimiento: • Criterio de falla de Mohr- ...
System is intended for installation by a qualified electrician in accordance with the National Electrical Code and local regulations. -. Go to the main fuse box, ...
System is intended for installation by a qualified electrician in accordance with the National Electrical Code and local regulations. -. Go to the main fuse box, ...
Install a quick link onto the chain and fixture loop, then install another quick link to the other ... place the canopy onto the mounting plate, and secure it in place by.
LAMINATOR CONTROLS / QUICK START GUIDE. 3. ENGLISH. 4-5. FRANCAIS. 6-7. ESPAÑOL. 8-9. INDEX ... DO test laminate scrap sheets and set the machine before final laminations. DO remove staples and other metal articles prior to laminating. DO keep the ..
17 jun. 2017 - College of Choice: Dartmouth College in. Hanover, New Hampshire. Future Plans: Future Plans: I plan on majoring in biology at Dartmouth in ...
Finish: base of oil / natural wax of vegetable origin with pine extracts. Massivholz Hocker bestehend aus Holzleisten übereinander gesetzt. Mittels Öl oder Wachs ...
11 mar. 2017 - DO test laminate scrap sheets and set the machine before final .... This unit is equipped with a Pouch Tracking System that will detect and.
