Pendant GENERAL PRODUCT INFORMATION: These fixtures are intended to be installed utilizing NEC compliant junction boxes.
CAUTION - RISK OF FIRE This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
This product is safety listed for dry locations only. This product may be dimmed with a standard incandescent dimmer.
Use minimum 90°c supply conductors.
This instruction shows a typical installation.
1A 1
3 LAMP
SHADE COLLAR NUT SPACER
2
SHADE
SOCKET
1
Follow enclosed supplement installation instructions for electrical and fixture installation onto house outlet box.
2
Place the shade and spacer over the socket, then secure them in place by screwing the shade collar nut onto the socket.
3
Screw the lamp into the socket. Refer to the label on the lamp socket for Max Wattage information.
1
MISE EN GARDE - RISQUE D'INCENDIE Ce produit doit être installé selon le code d’installation pertinent , par une personne qui connaÎt bien le produit et son fonctionnement ainsi que les risques inhérents
Les fils d’alimentation doivent convenir pour 90°c.
1A 1
3 AMPOULE
ECROU DE COLLIER ESPACEUR
2
ABAT-JOUR
DOUILLE
1
Suivez les instructions d'installation de suppléments fermés pour l'installation électrique et appareil sur une boîte de sortie de la maison.
2
Placez l'abat-jour et l'espaceur sur le socket, puis fixez-les en place en vissant l'écrou de collier sur la douille.
3
Visser les ampoules dans les douilles. Reportez-vous à l'étiquette sur la douille de le luminaire pour obtenir des informations de Max Puissance.
2
ADVERTENCIA - RIESGO DE INCENDIO Este productor debe ser instalado segun el codigo de instalacion aplicable por una persona que conozca la constussion y el funcionamiento del producto y los riesgos que supone.
Conductores de alimentacion 90°c Min.
1A 1
3 BOMBILLA
TUERCA DE COLLAR ESPACIADOR
2
PANTALLA
ENCHUFE
1
Siga las instrucciones de instalación de suplementos cerrados para la instalación eléctrica y el accesorio sobre la caja de salida de la casa.
2
Coloque la pantalla y el espaciador sobre el enchufe, luego fijarlos en su lugar atornillando la tuerca de pantalla en el enchufe.
3
Atornille las bombillas en los enchufes. Consulte la etiqueta del enchufe de la lámpara para obtener información Max de Potencia.
luminaire et le fixer avec la petite vis de fixation à l'aide d'une clé Allen. Fixez le bras à la ... 555 Theodore Fremd Ave Suite B101 Rye, NY 10580. 800.969.3347.
CAUTION - RISK OF FIRE. This product must be installed in accordance with the applicable installation code by a person familiar with the construction and ...
... then secure them in place by screwing the shade collar nut onto the socket; ... de suplementos cerrados para la instalación eléctrica y el accesorio sobre la ...
Place the rubber washer, the shade, and large washer onto the threaded pipe (in that order), then secure them in place using a hex nut. Place the decorative cup ...
Coloque la base de la lámpara en los esparragos de montaje y seguro en su lugar atornillando las tuercas capuchon en los esparragos. Atornille las en los ...
Screw the fixture cover onto the top of the socket assembly. Screw the lamp into the socket. Refer to the label on the lamp socket for Max Wattage information. Screw the short end of the threaded pipe to the bottom of the socket assembly. Place the s
Place the shade and spacer over the socket, then secure them in place by screwing the shade collar nut onto the socket; repeat for remaining sockets. Screw the ...
Consulte la etiqueta del enchufe de la lámpara para obtener información Max de ... Fije la placa de montaje a la caja eléctrica con dos tornillos de la placa de ...
Allier 1 Light Chandelier. 1.1. F2952-1-F2953-1. Chandelier. F2952/1, F2953/1_. G. P. I. : ENERAL RODUCT NFORMATION. These fixtures are intended to be ...
CAUTION - RISK OF FIRE. This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved. Use minimum 90°c supply conductors. SHADE. TO
Frontage 1 Light Pendant. 1.0. P1369_P1370. Pendant. P1369, P1370. G. P. I. : ENERAL RODUCT NFORMATION. This product is listed by one of the following.
W 1782. B. Wall. G. P. I. : ENERAL RODUCT NFORMATION. These fixtures are intended to be installed utilizing compliant. NEC junction boxes. This product is ...
Connect the black fixture wire (round and/or smooth) to the hot power line wire with a wire ... Refer to the label on the lamp socket for Max Wattage information. 1.
WB1713. WB1713. Install the glass panels by sliding them into the fixture and securing them using the tabs. Secure the mounting plate to the electrical box with ...
Mount the fixture base onto the mounting plate and secure it with the Allen screws using an Allen wrench. Screw the lamp into the socket. Refer to the label on ...
National Fire Protection Association (NFPA), and the American ... FlexTM Series Humidity Sensing Fan/Light ONLY:Do not use a speed .... controller module.
Secure the mounting plate to the electrical box with the two provided mounting plate screws. Connect the fixture ground wire to a suitable ground in accordance to local electrical codes. Connect the white fixture wire to the neutral power line wire w
the applicable installation code by a person familiar with the construction ... Ce produit doit être installé conformément au code ... A Generation Brands Company.
Place the shade over the socket, then secure it in place by tightening the collar nut. Screw the lamp into the socket. Refer to the label on the lamp socket for Max ...
