Hamlet 5 and 9 Light Chandelier

the applicable installation code by a person familiar ... Screw the threaded nipple to the top of the fixture, place the nipple cover over the threaded nipple, and ...
86KB Größe 2 Downloads 2 vistas
Installation Instructions for

F3065-5-F3066-9

Hamlet 5 and 9 Light Chandelier

F3065/5, F3066/9

1.0

Chandelier GENERAL PRODUCT INFORMATION:

CAUTION - RISK OF FIRE This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.

These fixtures are intended to be installed utilizing NEC compliant junction boxes. This product is safety listed for damp locations.

Use minimum 90°c supply conductors.

1A 4

FIXTURE LOOP NIPPLE COVER

1

THREADED NIPPLE LAMP FIXTURE ARM 6

COLLAR NUT SHADE

5

SOCKET BOLT 3

3

BOTTOM ASSEMBLY 1

Screw the threaded nipple to the top of the fixture, place the nipple cover over the threaded nipple, and secure it in place by screwing on the fixture loop.

2

Spread the fixture arms until they are equally spaced apart.

3

Install the bottom assembly to the bottom of the fixture arms by partially tightening each bolt in small increments until the bottom assembly is fully secured.

4

Follow enclosed supplement installation instructions for electrical and fixture installation onto house outlet box.

5

Place the shade onto the socket and secure it in place by screwing the collar nut onto the socket. Repeat for remaining shades.

6 5

Screw the lamps into the sockets. Refer to the label on the socket for Max Wattage information.

1

ATTENTION : RISQUE D'INCENDIE Ce produit doit être installé conformément au code d'installation en vigueur par une personne familière avec la construction et l'exploitation du produit et les risques qu'il entraîne.

Utiliser les conducteurs d'alimentation supérieure à 90° c.

1A 4

BOUCLE DE LUMINAIRE COUVERCLE D’ATTACHE

1

ATTACHE FILETÉ

AMPOULE BRAS DE LUMINAIRE 6

ECROU DE COLLIER ABAT-JOUR

5

DOUILLE BOULON 3

3

ASSEMBLAGE DE FOND

1

Visser le attache fileté en haut de luminaire, placez le couvercle d’attache sur le attache fileté, et fixez-le en place par vissage sur la boucle de luminaire.

2

Écarter les bras de luminaire jusqu'à ce qu'ils soient également espacées.

3

Installer l'assemblage de fond de la partie inférieure des bras de luminaire par serrage de chaque boulon en partie par petits incréments jusqu'à ce que l'assemblage de fond est entièrement sécurisé.

4

Suivez les instructions d'installation de suppléments fermés pour l'installation électrique et appareil sur une boîte de sortie de la maison.

5

Placez l'abat-jour sur la douille et fixez-le en place par vissage de l'écrou de collier sur la douille. Répétez l'opération pour les tons restants.

6

Visser l’ampoules dans les douilles. Reportez-vous à l'étiquette sur la prise d'informations Max Puissance.

2

PRECAUCIÓN: RIESGO DE INCENDIO Este producto debe instalarse de acuerdo con el código de instalación aplicable por una persona familiarizada con la construcción y operación del producto y los riesgos que conllevan.

Utilizar conductores de suministro mínimo 90° c.

1A 4

BUCLE DE LA LÁMPARA CUBIERTA DEL CONECTADOR

1

CONECTADOR ROSCADO

BOMBILLA BRAZO DE LA LÁMPARA 6

TUERCA DE COLLAR

5

PANTALLA

ENCHUFE PERNO 3

3

CONJUNTO INFERIOR

1

Atornille el conectador roscado a la parte superior de la lámpara, coloque la cubierta del conectador roscado sobre el conectador roscado y seguro en su lugar enroscando en el bucle de la lámpara.

2

Difundir los brazos accesorios hasta que son igualmente espaciados.

3

Instale el conjunto de la parte inferior a la parte inferior de los brazos de la lámpara apretando parcialmente cada perno en pequeños incrementos hasta que el conjunto inferior está totalmente asegurada.

4

Siga las instrucciones de instalación de suplementos cerrados para la instalación eléctrica y el accesorio sobre la caja de salida de casa.

5

Coloque la pantalla en el enchufe y seguro en su lugar enroscando la tuerca de collar en el enchufe. Repita para las pantallas restantes.

6

Atornille las bombillas en los enchufes. Consulte la etiqueta en la toma de información Max Potencia.

3

SAVE THESE INSTRUCTIONS!

7400 Linder Ave, Skokie, IL 160077 800.969.3347 www.Feiss.com © 2016 Feiss.All rights reserved.The "Feiss" graphic is a registered trademark of Feiss. Feiss reserves the right to change specifications for product improvements without notification.

A Generation Brands Company

4