Application. The RLC is designed for high burden metering and relaying applications and is available in single or dual ratios. It may be used with uninsulated bus bar or cable up to 600 volts or with insulated primary conductors at higher voltages. Core and coils. The core and coil assembly is a ring-type core toroidally ...
Product features – 600 volt indoor or outdoor – 10 kV BIL – 25 through 60 hertz – Primary amperes: 750-4000 – 5.5" (140 mm) window size Application The RLC is designed for high burden metering and relaying applications and is available in single or dual ratios. It may be used with uninsulated bus bar or cable up to 600 volts or with insulated primary conductors at higher voltages. Core and coils The core and coil assembly is a ring-type core toroidally wound with a fully distributed secondary winding. The assembly is then completely enclosed in molded thermoplastic rubber. Polarity markings are permanently molded into the case. Insulation Thermoplastic rubber insulating material is permanently molded to the core and coil assembly, resulting in a compact unit with excellent mechanical, thermal, and dielectric characteristics. Secondary terminals and cover Large compression-type terminals are equipped with slotted hex-head tightening screws. A rotatable shorting bar is positioned on a center post located midway between the terminals. The center post also serves as a third terminal on dual ratio transformers. A clear polycarbonate cover allows a visual check of connections. The cover is keyed to the shorting bar to ensure proper installation and can be sealed with a sealing wire. Base The base is constructed of corrosion-resistant aluminum and secured to the encapsulated base support by four symmetrically located screws.
Primary The RLC has a 5.5" (140 mm) round primary opening that can accept 4" square bus bar or multiple cables. Test reports Test reports are stored electronically and can be e-mailed in various formats at the time of shipment. Standards This unit can be tested to all applicable IEEE, CSA, or IEC standards as requested and is a UL Recognized Component.
Selection guide Primary ampere rating
Rating factor @ 30°C
Rating factor @ 55°C
IEEE metering accuracy
IEEE relaying accuracy
Style number
750
2.0
1.5
0.3B-0.5
C100
7524A52G01
800
2.0
1.5
0.3B-0.9
C100
7524A52G02
900
2.0
1.5
0.3B-0.9
C100
7524A52G03
1000
2.0
1.5
0.3B-0.9
C100
7524A52G04
1200
2.0
1.5
0.3B-1.8
C200
7524A52G05
1500
2.0
1.5
0.3B-1.8
C200
7524A52G06
2000
1.5
1.2
0.3B-1.8
C200
7524A52G07
3000
1.33
1.0
0.3B-1.8
C200
7524A52G08
4000
1.33
1.0
0.3B-1.8
C200
7524A52G09
600/1200
2.0/2.0
1.5/1.5
0.3B-0.5/0.3B-1.8
C100/C200
7524A52G10
800/1600
2.0/1.5
1.5/1.2
0.3B-0.5/0.3B-1.8
C100/C200
7524A52G11
1000/2000
2.0/1.5
1.5/1.2
0.3B-0.9/0.3B-1.8
C100/C200
7524A52G12
1500/3000
1.5/1.33
1.2/1.0
0.3B-1.8/0.3B-1.8
C100/C200
7524A52G13
2000/4000
1.5/1.33
1.2/1.0
0.3B-1.8/0.3B-1.8
C100/C200
7524A52G14
300
2.0
1.5
0.3B-0.1
C90
9625A21G10
800
2.0
1.5
-
C200
9625A21G11
1000
2.0
1.5
0.3B-1.8
C200
9625A21G01
2000
1.5
1.2
0.3B-1.8
C400
9625A21G02
3000
1.5
1.2
0.3B-1.8
C400
9625A21G03
4000
1.5
1.2
0.3B-1.8
C400
9625A21G04
1000/2000
2.0/1.5
1.5/1.2
0.3B-1.8/0.3B-0.9
C200/C400
9625A21G05
1500/3000
1.5/1.33
1.2/1.0
0.3B-1.8/0.3B-1.8
C200/C400
9625A21G06
2000/4000
1.5/1.33
1.2/1.0
0.3B-1.8/0.3B-1.8
C200/C400
9625A21G07
High accuracy RLC
Approximate weights: Standard RLC - 21 lbs; High accuracy - 29 lbs.
For more information please contact: Unit dimensions ABB Inc. Medium Voltage Distribution Components 3022 NC 43 North Pinetops, NC 27864 USA Phone: +1 252 827 3212 Fax: +1 252 827 4286
.38 [10] x 1.25 [32] SLOT W .75 [19] HOLE 2-TOTAL
Ø.31 [8] HOLE 4-TOTAL
1.00 [25]
X1
4.13 [105]
X2
4.50 [114] 4.88 [124] 10.50 [267]
www.abb.com/mediumvoltage COMPRESSION TYPE SECONDARY TERMINALS FOR #14 TO #3 WIRE
6.53 [166]
MOUNTING HOLES FOR .38 BOLTS 2-TOTAL
Note: The information contained in this document is for general information purposes only. While ABB strives to keep the information up to date and correct, it makes no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability, or availability with respect to the information, products, services, or related graphics contained in the document for any purpose. Any reliance placed on such information is therefore strictly at your own risk. ABB reserves the right to discontinue any product or service at any time.
