bolt holes facilitate mounting. Secondary Terminals. Secondary terminals are 10-32 stud-type with hardware. Curves. Saturation, overcurrent, ratio correction factor, and phase-angle curves are available upon request. Test Reports. IEEE test reports are stored electronically and can be e-mailed in various formats at the time ...
Type BYZ-O Current Transformer 600 Volt, 10 kV BIL, Indoor Product Bulletin 1VAP428612-DB
Product Features • 600 Volt Indoor • 10 kV BIL • 25 - 60 Hertz • Primary Amperes: 50 and 100 • Mechanical Rating: 180 x rated current • Thermal Rating: 100 x rated current, one second
Application The BYZ-O zero-sequence indoor current transformer is used for ground fault detection. It is designed for zero-sequence overcurrent relaying schemes and for mounting in the cable compartment of metalclad switchgear. A phase imbalance in the outgoing cables, which pass through the transformer window, produces a secondary current in the BYZ-O. Construction Features The oval-shaped ring-type core is insulated and toroidally wound with a fully distributed secondary winding. The complete unit is cast in polyurethane for added insulation and protection. Four 0.56" corner bolt holes facilitate mounting.
Secondary Terminals Secondary terminals are 10-32 stud-type with hardware.
• UL Recognized Component; File No. E96461
Curves Saturation, overcurrent, ratio correction factor, and phase-angle curves are available upon request. Test Reports IEEE test reports are stored electronically and can be e-mailed in various formats at the time of shipment.
UL Recognized Component
Standards This unit meets all applicable IEEE and NEMA standards and is a UL Recognized Component.
Application. The CO-9740 indoor, split-core window-type current transformer is a 600 volt, 10 kV BIL rated unit. Primary current ratios are available from 100:5 to 4000:5 at 60 Hertz with a rating factor of up to. 1.5. This unit is convenient to inst
Application. The RLC is designed for high burden metering and relaying applications and is available in single or dual ratios. It may be used with uninsulated bus bar or cable up to 600 volts or with insulated primary conductors at higher voltages. C
48 x 36 x 11. 16.25. 800. 600. 30 4W. 3. CTMB8003L or. (6) 1/0-250. 36 x 30 x 11. 10.25. (6) 1/0 250. KCMIL. 36 x 36 x 11. 10.25. (1) 1/0-600. 48 x 30 x 11. 16.25.
18. For vertical mounting. Bushings max. 3000 kg (6600 lb). If a lifting device for application at ...... tap, and the capacitance C2, between the test tap and earth.
and the electrical connection is made through a spiral spring fastened to the moving contact arm and frame assembly. 2.2 Indicating contactor switch (Ics).
the heating element, buy a suitable descaler and descale your kettle. After descaling ... deposit on the side of the kettle. This is normal but can be removed with.
the controlled trimming of moustache or sideburns. Keeping your shaver in top shape. About every four weeks, clean the cutter block with Braun cleaning agents.
e blocco coltelli), premere con una penna a sfera sul tasto reset (9) per almeno 3 secondi per risettare il software. Mentre avrete il tasto premuto la spia lampeg- gerà e si spegnerà una volta che il software sarà resettato. L'operazione di reset pu
fitted as the Kitchen Machine could become unstable. ⢠Do not operate your appliance near the edge of a work surface. ⢠This appliance shall not be used by ...
