TEL1A5 Series - Toto USA

Self-generating hydropowered EcoPower system ... hydropowered, self-generating EcoPower System. Product ... Complies to California Green Building Code/.
467KB Größe 3 Downloads 10 vistas
TEL1A5 Series Libella™ EcoPower® Faucet FEATURES • Self-generating hydropowered EcoPower system • No minimum daily usage requirement • Micro-sensor positioned underneath the spout head for accurate hand detection ensuring smooth and consistent water distribution • Vandal resistant aerator housing • Durable chrome plated spout body • Single-hole mount installation • Kit includes spout body, controller box , and mounting hardware - less supply lines • Equipped with 0.5gpm flow control

MODELS

TEL1A5-D10E • TELS1A5 (Libella Spout) • TELC105-D10E (Controller: 0.09gpc, 10 sec on-demand)



TEL1A5-D10EM • TEL1A5-D10E (Libella Spout Kit) • TLM10 (Mixing Valve)



TEL1A5-D10ET • TEL1A5-D10E (Libella Spout Kit) • TLT10R (Thermostatic Mixing Valve)



TEL1A5-C20E • TELS1A5 (Libella Spout) • TELC105-C20E (Controller: 0.19gpc, 20 sec continuous)



TEL1A5-C20EM • TEL1A5-C20E (Libella Spout Kit) • TLM10 (Mixing Valve)



TEL1A5-C20ET • TEL1A5-C20E (Libella Spout Kit) • TLT10R (Thermostatic Mixing Valve)

EcoPower

PRODUCT SPECIFICATION TOTO Model #______________ Product shall have hydropowered, self-generating EcoPower System. Product shall have vandal resistant aerator. Product shall have maximum of 10 seconds on-demand flow (0.09gpc), or 20 seconds continuous flow (0.19gpc). Product shall have anti-scald shape memory alloy thermostatic mixing valve (-ET models only). Product shall have self-adjusting sensor.

CODES/STANDARDS • • • • •

COLORS/FINISHES • #CP Polished Chrome

OPTIONAL ACCESSORIES • THP3158#CP - 4" Cover Plate • THP3159#CP - 8" Cover Plate • THP3237 - Swivel Coupling

• • *

Operates below federally mandated consumption limit of 0.25gpc. Complies to California Green Building Code/ CALGreen of 0.20gpc. Complies with Federal and State statutes as lowlead (contains a weighted average of 0.25% lead or less). Complies with City of Los Angeles Water Efficiency Ordinance. Certifications: IAPMO(cUPC), California Energy Commission (CEC) State of Massachusetts, and others. Meets or exceeds ASME A112.18.1M/CSA B125.1, and NSF372-2011. ADA compliant. For codes and standards of mixing valves TLM10 and TLT10R, please refer to corresponding product spec sheets. LOW-LEAD

TEL1A5 Series SPECIFICATIONS Power Supply Sensor Detection Range

NOTE

EcoPower

Following the federal mandate for water efficiency outlined in the Environmental Protection Act of 1992, faucets can be rated for water consumption based on two categories: Flow Rate and Water Consumption. TOTO uses the water consumption standard because it is the most accurate method of measuring water use. TOTO faucets also comply with the CALGreen Guideline of water usage.

5-1/8" - 7-7/8" (130 - 200mm) Sensor is self-adjusting

Water Supply Pressure

Min (Flowing) Pressure: 15psi (100 kPa) Max (Static) Pressure: 80 psi (551kPa)

Water Supply

G1/2 (1/2 NPSM compatible)

Inlet Temperature Range

39-110°F(4-42°C)

Ambient Temperature

32-104°F(0-40°C)

Humidity

Max. 90% RH 0.09 gpc* - max 10 second On-Demand** (0.09 gpc = 0.5 gpm x 10/60 sec)

Flow Rate

Warranty

Libella™ EcoPower® Faucet

Water Saving On-Demand [10 sec.] faucet (0.09gpc) 64% less than Federal Standard (0.25gpc) 55% less than CAL Green (0.20gpc)

Equipped with 0.5 gpm flow control 0.19 gpc* - 20 second Continuous*** (0.19 gpc = 0.5 gpm x 20/60 sec) Equipped with 0.5 gpm flow control

Continuous [20 sec.] faucet (0.19gpc) 24% less than Federal Standard (0.25gpc) 5% less than CAL Green (0.20gpc)

Three year limited

*Gallons per cycle (gpc) is the amount of water per usage cycle . ** On-demand refers to the way in which the water is dispersed (i.e.; water is only dispersed when the sensor is activated by the user as needed). *** Continuous Libella means that water is dispersed for a continuous 20 second cycle. 7-5/8” (194mm)

Libella1-5/8”

Controller

Controllers

1-15/16” (48mm)

5-1/2” (140mm)

Ø1-5/8” (Ø42mm)

5-1/2” (140mm)

1-11/16” (42mm)

G1/2 compatible with ½ NPSM 3-13/16”(98mm)

Available Mixing Valves

G1/2

Faucet hole Ø1-3/8” (Ø35mm)

G1/2

1-7/16” (36mm)

3/8 COMPRESSION

2-1/2” (63mm)

G1/2

Faucet hole Ø1-3/8” (Ø35mm)

2-13/16” (71mm)

G1/2

80°

7” (178mm)

(Ø42mm)

3-5/16”(83mm)

1-3/4” (44mm)

7-5/8” (194mm)

3-5/8”(94mm) 4-5/8”(117mm)

5-5/8”(142mm)

80°

TELC105 TELC101

3-1/8” 2” (50mm) 2” (50mm) (80mm) Max deck thickness Max deck thickness

1-5/8” (42mm) Ø1-5/8”

1-15/16” (48mm)

TELS1A5 TELS1A1

3-1/8” (80mm)

Libella (42mm)

3-3/16”(82mm)

TELS1A5 TELS1A1

7/8” (23mm) Φ1-5/8”(Φ42mm)

Hot/Cold Mixing Tee (TLM10)

G1/2 compatible with ½ NPSM

Thermostatic Mixing Valve (TLT10R) These dimensions and specifications are subject to change without notice Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com | © TOTO USA

#SS-01103 v.05