TET3GA - Toto USA

PRODUCT SPECIFICATION. • #SS Stainless Steel. TET3GA31#SS (Back spud wall). • TET3GA#SS (1.6 gpf flush valve). • VB13RB-31 (1-1/2" vacuum breaker ...
767KB Größe 0 Downloads 8 vistas
TET3GA EcoPower® Toilet Flush Valve, 1.6 gpf FEATURES • • • • • • • • • • •

1.6 GPF Self-powered hydroelectric flush valve system No minimum daily usage requirement 4" x 4" stainless steel coverplate with brushed satin finish and solid bronze valve body Self-cleaning piston valve with 360° filter screen Neutral rough-in and adjustable tail piece connection Manual flush override Smart sensor with self-adjusting detection range 6-second detection time to prevent ghost flushing Concealed flush valve with 1" angle stop and 1-1/2" vacuum breaker set ADA compliant

MODELS TET3GA31#SS (Back spud wall) • TET3GA#SS (1.6 gpf flush valve) • VB13RB-31 (1-1/2" vacuum breaker tube, 1" angle stop)

EcoPower Auto Functions

TET3GA32#SS (Top Spud) • TET3GA#SS (1.6 gpf flush valve) • VB13RB-32 (1-1/2" vacuum breaker tube, 1" angle stop) TET3GA33#SS (Back spud floor) • TET3GA#SS (1.6 gpf flush valve) • VB13RB-33 (1-1/2" vacuum breaker tube, 1" angle stop)

COLORS/FINISHES • #SS Stainless Steel

OPTIONAL ACCESSORIES • Z-4000-J - Adapter for ground joint angle stops

CODES/STANDARDS • Meets or exceeds ASSE 1037, CSA B125.3 • Certifications: IAPMO(cUPC), ASSE, State of Massachusetts, and others • Code Compliance: UPC, IPC, NSPC, NPC Canada, and others • ADA compliant

Piston Valve

PRODUCT SPECIFICATION TOTO® Model No. _____________________________ Product shall be 1.6 GPF. Product shall be an automatic infrared sensor-activated, toilet flush valve. Product shall use hydropower, EcoPower flush valve system. Product shall have 4" x 4" cover plate with brushed stainless steel finish and solid bronze valve body. Product shall have smart sensor with selfadjusting detection range. Product shall have neutral rough-in and adjustable tail piece connection Product shall have smart sensor with self-adjusting detection range. Product shall have manual flush override. Product shall have 6-second detection time to prevent ghost flushing. Product shall have piston with debris screen and solenoid with self-cleaning mechanism. Product shall be ADA compliant.

TET3GA EcoPower® Toilet Flush Valve, 1.6 gpf SPECIFICATIONS

INSTALLATION NOTES

For commercial applications only. • Material Bronze casting Warning: Failure to properly adjust angle stop to • Power supply EcoPower the appropriate level can potentially cause property • Sensor detection time Factory setting at six damage. (6) seconds minimum • Sensor detection range Self-adjusting to For detailed installation instructions, please refer to environment the installation manual. • Discharge quantity Preset to 1.6 gpf/ 6.0 lpf Max flow rate to be used with • Operating temperature 32°-104°F (0°-40°C) TET3GA___________: 1.6 gpf • Water supply pressure 15 psi - 125 psi* • Water supply connection 1" NPT Confirm with local codes and standards for floor drain • Warranty Three year limited requirement. Adjust control stop for proper flow rate *Water pressures over 80 psi are not recommended for most plumbing to the fixture. fixtures. Check your local plumbing code for details.

The recommended installation for the flush valve is to have a 7" (178mm) minimum space in wall with a minimum 12" x 12" access panel or walk-in chase (for service and maintenance purposes). Do not place grab bars in front of sensor for ADA stalls.

DIAGRAM 4-3/4” ± 1/2” (120 ± 13mm) Right water supply pipe

Left water supply pipe 1”NPT (toilet), 3/4” (urinal)

1”NPT (toilet), 3/4” (urinal) 33-1/2" (850mm )

1-1/4” (31 mm) CL of sensor

** 3-11/16” (94 mm)

Toilet top spud Ø2-3/16” (Ø56 mm) hole Urinal top spud Ø1-5/16” (Ø33mm) hole Urinal back spud Ø1-5/16” (Ø33 mm) hole Toilet back spud Ø2-3/16” (Ø55 mm) hole

15°

Max 19-11/16” (Max 500mm)

16” (406mm)

** 3-11/16” (94mm)

4 x Ø5/16" (Ø8mm) hole

11” (279mm)

X”

3-11/16” (94mm)

4-3/8” (110mm) 3-11/16” (94mm)

4-3/4” 120mm)

4-3/8” (110mm) 3-11/16” (94mm)

1-1/4” (31mm)

4-3/4” (120mm) 3-11/16” (94mm)

* X”, ‡ = At least 5” clearance from sensor to tip of toilet seat up position or to top of grab bar is required to avoid false detection. ** Opening in wall

These dimensions and specifications are subject to change without notice Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com | © TOTO USA

#SS-01167, v.01