TET2GA - Toto USA

Power supply. EcoPower. • Sensor detection time. Factory setting at six ... Max flow rate to be used with. TET2GA___________: 1.6 gpf. Confirm with local codes ...
782KB Größe 4 Downloads 3 vistas
TET2GA EcoPower® Toilet Flush Valve, 1.6 gpf FEATURES • • • • • • • • • • •

1.6 GPF Self-powered hydroelectric flush valve system No minimum daily usage requirement Heavy-duty 14" x 12" stainless steel coverplate with satin finish and solid bronze valve body Self-cleaning piston valve with 360° filter screen Neutral rough-in and adjustable tail piece connection Manual flush override Smart sensor with self-adjusting detection range 6-second detection time to prevent ghost flushing Concealed flush valve with 1" angle stop and 1-1/2" vacuum breaker set ADA compliant

MODELS TET2GA31#SS (Back spud wall) • TET2GA#SS (1.6 gpf flush valve) • VB13RB-31 (1-1/2" vacuum breaker tube, 1" angle stop)

EcoPower Auto Functions

TET2GA32#SS (Top Spud) • TET2GA#SS (1.6 gpf flush valve) • VB13RB-32 (1-1/2" vacuum breaker tube, 1" angle stop) TET2GA33#SS (Back spud floor) • TET2GA#SS (1.6 gpf flush valve) • VB13RB-33 (1-1/2" vacuum breaker tube, 1" angle stop)

Piston Valve

COLORS/FINISHES

PRODUCT SPECIFICATION

• #SS Stainless Steel

TOTO® Model No. _____________________________ Product shall be 1.6 GPF. Product shall be an automatic infrared sensor-activated, toilet flush valve. Product shall use hydropower, EcoPower flush valve system. Product shall have heavy-duty 14" x 12" stainless steel coverplate with satin finish and solid bronze valve body. Product shall have smart sensor with self-adjusting detection range. Product shall have neutral rough-in and adjustable tail piece connection Product shall have smart sensor with self-adjusting detection range. Product shall have manual flush override. Product shall have 6-second detection time to prevent ghost flushing. Product shall have piston with debris screen and solenoid with self-cleaning mechanism. Product shall be ADA compliant.

OPTIONAL ACCESSORIES • Z-4000-J - Adapter for ground joint angle stops

CODES/STANDARDS • Meets or exceeds ASSE 1037, CSA B125.3 • Certifications: IAPMO(cUPC), ASSE, State of Massachusetts, and others • Code Compliance: UPC, IPC, NSPC, NPC Canada, and others • ADA compliant

TET2GA EcoPower® Toilet Flush Valve, 1.6 gpf SPECIFICATIONS

INSTALLATION NOTES

• Material Bronze casting For commercial applications only. • Power supply EcoPower Warning: Failure to properly adjust angle stop to • Sensor detection time Factory setting at six the appropriate level can potentially cause property (6) seconds minimum damage. • Sensor detection range Self-adjusting to environment For detailed installation instructions, please refer to • Discharge quantity Preset to 1.6 gpf/ the installation manual. 6.0 lpf • Operating temperature 32°-104°F (0°-40°C) Max flow rate to be used with • Water supply pressure 15 psi - 125 psi* TET2GA___________: 1.6 gpf • Water supply connection 1" NPT • Warranty Three year limited Confirm with local codes and standards for floor drain requirement. Adjust control stop for proper flow rate *Water pressures over 80 psi are not recommended for most plumbing to the fixture. fixtures. Check your local plumbing code for details.

The recommended installation for the flush valve is to have a 7" (178mm) minimum space in wall. Do not place grab bars in front of sensor for ADA stalls.

DIAGRAM 4-3/4” ± 1/2” (120 ± 13mm)

Left water supply 1” NPT (toilet), 3/4” (urinal)

Right water supply 1” NPT (toilet), 3/4” (urinal)

Sensor Location 3-7/16” (87mm)

CL of sensor ** 11-15/16” (303mm)

* 14-3/4” ‡ from top of fixture (toilet)

33-1/2" (850mm )

11” (279mm)

3/4” (19mm)

** 13-1/2” (343mm)

16” (406mm)

Stud Toilet top spud Ø2-3/16” (Ø56mm) hole Urinal top spud Ø1-1/2” (Ø38mm) hole

15°

* X”

Max 19-11/16” (Max 500mm)

Toilet Back spud Ø2-3/16” (Ø56mm) hole Urinal Back spud Ø1-5/16” (Ø33mm) hole

* X”, ‡ = At least 5” clearance from sensor to tip of toilet seat up position or to top of grab bar is required to avoid false detection. ** Opening in wall 13-3/8” (340mm) 12-5/8” (320mm)

11-7/8” (301mm) 11” (280mm)

12-5/8” (320mm) 11” (280mm)

14-3/16” (360mm) 12-5/8” (320mm)

These dimensions and specifications are subject to change without notice Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com | © TOTO USA

#SS-01165, v.01