Palm P101UNA Flash Bulb Replacement

Palm P101UNA Flash Bulb Replacement This guide will step-by-step help you to replace a broken Flash bulb.

Escrito por: ironwill13791

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 1 de 5

Palm P101UNA Flash Bulb Replacement

INTRODUCCIÓN This guide will teach you how to replace the flash bulb on the back of the phone.

HERRAMIENTAS:

PARTES:

1.5mm Hex Screwdriver (1)

Replacement flash bulb for Palm Pre (1)

Spudger (1) Tweezers (1)

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 2 de 5

Palm P101UNA Flash Bulb Replacement

Paso 1 — Battery 

Push in the button at the bottom of the phone, and lift the back cap off.

Paso 2

 Remove the battery by pulling out the little tab.

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 3 de 5

Palm P101UNA Flash Bulb Replacement

Paso 3 — Flash Bulb 

Using the 1.5mm hex screwdriver, remove the 6 hex screws from the inner-most casing.



Using the spudger, remove the inner case from the phone.

Paso 4

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 4 de 5

Palm P101UNA Flash Bulb Replacement

Paso 5



Using your spudger, slowly apply pressure on the bulb until it comes loose.

To reassemble your device, follow these instructions in reverse order. La versión más reciente de este documento fue generada en 2018-04-14 02:56:30 AM .

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 5 de 5