• AC/DC CURRENT • HIGH VISIBILITY DISPLAY • NON-CONTACT VOLTAGE TESTING • DC MICRO-AMPS • AUTO-RANGING • DATA & RANGE HOLD • TEMPERATURE
600V 400A 40M Ω
2m
ESPAÑOL
pg. 19
FRANÇAIS
pg. 37
ENGLISH
GENERAL SPECIFICATIONS Klein Tools CL380 is an automatically ranging true root mean square (TRMS) digital clamp meter that measures AC/DC current via the clamp, AC/DC voltage, DC microamps, resistance, continuity, frequency, capacitance, tests diodes via test-leads, and temperature via a thermocouple probe. It features a high visibility, reverse contrast LCD display that optimizes viewability both in dark or bright ambient lighting. • Operating Altitude: 6562 ft. (2000m) • Relative Humidity:
Operating Temp: 32° to 122°F (0° to 50°C). ⢠Storage Temp: -4° to 140°F (-20° to 60°C). ⢠Dimensions: 8.39" x 2.12" x 1.38" (213 x 54 x 35 mm). ⢠Weight: 7.3 oz.
(2) ≤ 3×107 Volt-Hz para rango de 750 V r. (3) 1% sobre rango ... (3) Las especificaciones son para entradas de ondas seno de rango >5%. Corriente AC ...
Align slot in center of punchdown blade with the pin located on the inside of the punchdown tool's ... Blocks/Keystone Jacks. LO. 24-26 gauge conductors. All. HI.
in extreme conditions exceeding the limits mentioned in the Specifications section, allow the instrument to return to normal operating conditions before using it.
The Klein Tools CL3200 is an auto-ranging general-purpose clamp meter. It measures AC / DC voltage, AC current, and resistance. It can also test non-contact voltage and continuity. • Operating Altitude: 2000 meters. • Storage Altitude: 10000 meters.
Sujete el instrumento a metal para permitir su uso con las manos libres. K. .... N'utilisez jamais cet appareil de mesure sur un circuit dont la tension dépasse la.
Press the T1-T2 button 2 again to lock in T2 value and get the differential temperature value on the screen. • Long press T1-T2 button to exit. MEASURING ...
It measures AC / DC voltage, AC current, and resistance. It can also test continuity. • operating altitude: 2000 meters. • relative Humidity: 75% max. • operating ...
2. overload LED: The red LED above the detect LED will illuminate when the amplifier is overloaded. The volume should be reduced so changes in signal strength can be heard. 3. power-on/Battery Low LED: This LED will illuminate when the probe is activ
Current in Amps. V. Voltage Measurement ... results from alteration, tampering, accident, misuse, abuse, neglect, or improper maintenance. Batteries and ...
General speciFications. The Klein Tools MM6000 is a True RMS, auto-ranging multimeter. It measures AC/DC voltage, low impedance voltage, AC/DC current,.
Si el probador no indica que el tomacorriente está cableado correctamente, consulte a un electricista calificado. COMPROBACIÓN DE INTERRUPTORES GFCI. 1. Consulte el manual del usuario del tomacorriente con interruptor GFCI para obtener información so
The Klein Tools LAN Scout™ Jr. is a portable data cable tester. It tests and troubleshoots RJ45 terminated cables and provides built-in tone generation for cable ...
into the appropriate cavity. For shielded twisted pair (STP) cable, engage the tension loop. 4. Position the cable end on the strip length gage, B. This will provide a 0.600 inch length (minimum), once the conductors are untwisted. 5. Rotate tool onc
TAKING PHOTOS. While in Display mode, aim the camera 10 at the subject to be photographed and tap the. Photo button G to take a photo. CAPTURING VIDEO.
Replacement parts are available at www.kleintools.com. NOTE: For optimum performance, replace cutting inserts as a pair. D. C. 6 Hex screws for cutting inserts.
Turn the “release blade” dial in a counter-clockwise direction until the blade slides into place. 4. Release the “release blade” dial; the blade is now secure in the storage compartment. REMOVING BLADE FROM STORAGE COMPARTMENT. 1. Hold the Punchdown
Dimensions: 2.25" x 3.125" x 1.375". (57.2 mm x 79.4 mm x 34.9 mm). ⢠Weight (headlamp only): 2.96 oz. (84 g). ⢠Battery Type: Internal, Li-Ion, 3.7V / 1700mAh.