Screw the lamp into the socket. Refer to the label on the socket for Max Wattage information. Place the cover onto the frame nipple and secure it in place by screwing the cap onto the nipple. 6. CAUTION RISK OF FIRE. -. This product must be installed in accordance with the applicable installation code by a person familiar.
Outdoor GENERAL PRODUCT INFORMATION: Incandescent lamps may be dimmed with a standard incandescent dimmer. LED lamps may be dimmed with a LED dimmer. Consult lamp manufacturer for additional information.
CAUTION - RISK OF FIRE This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
This instruction shows a typical installation.
Use minimum 90°c supply conductors.
This product is safety listed for wet locations.
1A
CAP
7
COVER
LAMP
6
FRAME NIPPLE
DIFFUSER
SOCKET
POST SCREW
FIXTURE
4
5
FRAME SCREW
4 3
2
POST
1
Connect the fixture to a suitable ground in accordance to local electrical codes.
2
Connect the white fixture wire to the neutral power line wire with a wire nut.
3
Connect the black fixture wire to the hot power line wire with a wire nut.
4
Secure the fixture to the post with the post screws making sure to neatly tuck in all wiring.
5
Insert the diffuser into the fixture frame, then place the frame onto the fixture and secure them together using the frame screws.
6
Screw the lamp into the socket. Refer to the label on the socket for Max Wattage information.
7
Place the cover onto the frame nipple and secure it in place by screwing the cap onto the nipple. 1
ATTENTION : RISQUE D'INCENDIE Ce produit doit être installé conformément au code d'installation en vigueur par une personne familière avec la construction et l'exploitation du produit et les risques qu'il entraîne.
Utiliser les conducteurs d'alimentation supérieure à 90° c.
1A
CAPUCHON
7
COUVERCLE
AMPOULE
6
ATTACHE DE CADRE
DIFFUSEUR
DOUILLE
VIS DE POSTE
LUMINAIRE
4
5
VIS DE CADRE
4 3
2
POSTE
1
Connectez le luminaire à un terrain approprié en accord avec les codes électriques locaux.
2
Connectez le fil blanc de luminaire au fil de ligne à neutre avec un écrou de fil.
3
Connectez le fil noir de luminaire au fil chaud de la ligne d'alimentation avec un écrou de fil.
4
Fixez le luminaire à la poste avec les vis de poste en s'assurant de rentrer facilement dans tout le câblage.
5
Insérez le diffuseur dans le cadre de luminaire, puis placez le cadre sur le luminaire et fixez-les en utilisant les vis du cadre.
6
Visser l’ampoules dans les douilles. Reportez-vous à l'étiquette sur la douille d'informations Max Puissance.
7
Placez le couvercle sur le attache du cadre et fixez-le en place en vissant le capuchon sur le attache.
2
PRECAUCIÓN: RIESGO DE INCENDIO Este producto debe instalarse de acuerdo con el código de instalación aplicable por una persona familiarizada con la construcción y operación del producto y los riesgos que conllevan.
Utilizar conductores de suministro mínimo 90° c.
1A
CAPUCHON
7
CUBIERTA
BOMBILLA
6
CONECTADOR DEL MARCO
DIFUSOR
ENCHUFE
TORNILLO DEL POSTE
LÁMPARA
4
5
TORNILLO DEL MARCO
4 3
2
POSTE
1
Conecte la lámpara a una tierra adecuada de acuerdo con los códigos eléctricos locales.
2
Conecte el cable blanco de la lámpara al cable de línea de alimentación neutra con una tuerca para cable.
3
Conecte el cable negro de la lámpara al cable de línea eléctrica caliente con una tuerca para cable.
4
Fije la lámpara al poste con los tornillos del poste a meter cuidadosamente hacer seguro en todo el cableado.
5
Inserte el difusor en el marco de la lámpara, a continuación, coloque el marco en la lámpara y asegurarlos juntos utilizando los tornillos del marco.
6
Atornille las bombillas en los enchufes. Consulte la etiqueta en la toma de información Max Potencia.
7
Coloque la cubierta en la conectador del marco y asegúrela en su lugar atornillando la tapa en el conectador.
the applicable installation code by a person familiar with the construction ... Ce produit doit être installé conformément au code ... A Generation Brands Company.
registered trademark of Feiss. Feiss reserves the right to change specifications for product improvements without notification. A Generation Brands Company.
Placez l'abat-jour et espaceur sur le douille et le fixer en place par vissage de l'écrou de collier sur la douille. Visser l'ampoule dans la douille. Reportez-vous à l'étiquette sur la douille de l'ampoule pour obtenir des informations Max. Puissanc
Installation Instructions for. Estes 3 Light Outdoor Post. 1.0. OL11909. OL11909. Connect the fixture to a suitable ground in accordance to local electrical codes.
LENGÜETA. 3. Conecte la lámpara a una tierra adecuada de acuerdo con los códigos eléctricos locales. Conecte el cable blanco de la lámpara al cable de línea de alimentación neutra con una tuerca para cable. Conecte el cable negro de la lámpara al cab
TUYAU FILETÉ. FLEURON. ABAT-JOUR. CADRE. 2. Connectez le luminaire à un terrain approprié en accord avec les codes électriques locaux. Connectez le fil blanc de luminaire au fil de ligne à neutre avec un écrou de fil. Connectez le fil noir de luminai
Insert the glass panels into the shade, then secure them by installing the brackets using the screws and washers. Install the LED assembly to the top fixture using ...
NEC junction boxes. This product is safety listed for damp locations. Screw the lamp into the socket. Refer to the label on the socket for Max Wattage Information.
Secure the fixture to the post with the post screws making sure to neatly tuck in all wiring. ... Place the cover over the frame and secure it in place by screwing the finial onto the nipple ... Feiss reserves the right to ... A Generation Brands Com
Insert the diffuser into the diffuser base, place the LED assembly on top of the diffuser, and secure it to the top of the housing using the LED assembly screws.
Insert the diffuser into the diffuser base, then install the diffuser cover to the bottom of the fixture and secure it in place with the cover screws. Connect the fixture ...
Connect the black fixture wire to the hot power line wire with a wire nut. Neatly place the wires and wire nut connections into the junction box, mount the fixture ...
This product is safety listed for wet locations. For a complete list of dimmers, visit out website at www.Feiss.com. CAUTION RISK OF FIRE. -. This product must be ...
CAUTION - RISK OF FIRE. This product must be installed in accordance with the applicable installation code by a person familiar with the construction and ...
These fixtures are intended to be installed utilizing compliant junction. NEC boxes. This product is safety listed for wet locations. Incandescent lamps may be ...
Connectez le fil blanc de luminaire au fil de la ligne d'alimentation neutre ... en les insérant dans le luminaire et les fixer avec les supports et les vis de support.
Conecte el cable blanco de la lámpara al cable de línea de alimentación neutra con una tuerca para cable. Conecte el cable negro de la lámpara al cable de línea de alimentación caliente con una tuerca para cable. Monte la base de la lámpara sobre la
Install all glass panels by carefully sliding them into the housing and securing them using the tabs. NOTE: Adjustment of the socket assembly may be required when installing glass panels. Install the candle followers by placing them on top of the can
Connect the black fixture wire to the hot power line wire with a wire nut. Place the fixture ... applicable installation code by a person familiar with the construction ...
Director Esmeralda. $300. $350. $400. Equipo Mundial. $400. $500. $600. Equipo del Presidente $400. $600. $800. Para ganar en esta tabla debe tener al ...
Connect the fixture to a suitable ground in accordance to local electrical codes. Connect the white fixture wire to the neutral power line wire with a wire nut. Connect the black fixture wire to ... with the construction and operation of the product
Place the washer, outer shade, small spacer, inner shade, and large spacer over the socket (in that order), then secure them in place by tightening with the collar ...
Install all glass panels (except the door) by carefully sliding them into the fixture and ... Place the shade and spacer over the socket and secure them in place by ...
This product is suitable for wet locations. This product may be dimmed with a low voltage electronic dimmer. This instruction shows a typical installation. 1. 2. 1A.
