69-2021ES-1 - Range Stop Instructions - HVAC Warehouse Direct
1985 Douglas Drive North. 35, Dynamic Drive. Golden Valley, MN 55422. Toronto, Ontario M1V 4Z9 customer.honeywell.com. ® Marca Registrada en los E.U.A.
VisionPRO® Range Stop Instructions Enter Installer Setup
WE
MO
1. Press SYSTEM.
TH
FR
FocusPRO® Range Stop Instructions Enter Installer Setup 1. Press and hold the V and FAN buttons until the display changes.
SA
OK TO PICK MULTIPLE DAYS SCREEN LOCKED CHANGE FILTER UV LAMP
FocusPRO® 6000
FocusPRO® 5000
Following Schedule
SYSTEM HEAT AM
Humidity SCHED
CANCEL
HOLD
M23626
2. Press and hold these two buttons until the display changes. MO
WE
TH
FR
M24090
M23628
SA
OK TO PICK MULTIPLE DAYS SCREEN LOCKED CHANGE FILTER UV LAMP
2. Press NEXT until function 27 appears. FocusPRO® 6000
SYSTEM HEAT AM
CANCEL
DONE
FocusPRO® 5000
SETTING
FUNCTION
SETTING
FUNCTION
DONE
M23629
3. 4. 5. 6. 7.
Press V until function 0600 appears. Use V/W to set heat temperature range stop. WE TH FR SA MO Press V until function 0610 appears. OK TO PICK MULTIPLE DAYS SCREEN LOCKED CHANGE FILTER UV LAMP Use V/W to set cool temperature range stop. Press DONE.
Done
Next
Done
Next
M23625
3. 4. 5. 6.
M24091
Press V/W to set heat temperature range stop. Press NEXT until function 28 appears. Press V/W to set cool temperature range stop. Press DONE.
DONE
M23627
Setup Functions
Settings & Options ® Heat
0600
VisionPRO
temperature range stops
90
Max. heat temperature setting is 90°F (32°C) [Other options: 40°F to 90°F (4.5°C to 32°C)]
0610
VisionPRO® Cool temperature range stops
50
Min. cool temperature setting is 50°F (10°C) [Other options: 50°F to 99°F (10°C to 37°C)]
27
FocusPRO® Heat temperature range stops
90
Max. heat temperature setting is 90°F (32°C) [Other options: 40°F to 90°F (4.5°C to 32°C)]
28
FocusPRO® Cool temperature range stops
50
Min. cool temperature setting is 50°F (10°C) [Other options: 50°F to 99°F (10°C to 37°C)]
69-2021ES-1
Instrucciones del tope para rangos INSTRUCCIONES DEL TOPE PARA RANGOS
Instrucciones del tope para rangos VisionPRO®
Instrucciones del tope para rangos FocusPRO®
Ingrese la configuración de instalación
Ingrese la configuración de instalación
WE
MO
TH
OK TO PICK MULTIPLE DAYS
FR
SA
SCREEN LOCKED
CHANGE FILTER UV LAMP 1. Presione SYSTEM (sistema).
1. Presione y mantenga V y FAN (los botones del ventilador) hasta que cambie la pantalla.
Following Schedule
SYSTEM
FocusPRO® 6000
HEAT
FocusPRO® 5000
AM
Humidity SCHED
CANCEL
HOLD
M23626
2. Presione y mantenga estos dos botones en blanco hasta que cambie la pantalla. MO
WE
TH
FR
SA
OK TO PICK MULTIPLE DAYS SCREEN LOCKED CHANGE FILTER UV LAMP
M24090
M23628 SYSTEM
2. Presione NEXT (siguiente) hasta que aparezca la función 27.
HEAT AM
FocusPRO® 6000 CANCEL
DONE
FocusPRO® 5000
DONE
FUNCIÓN
M23629
3. Presione V hasta que aparezca la función 0600. 4. Use V/W para configurar el tope para rango de temperatura del sistema de calefacción. 5. Presione V MOhasta que aparezca la función 0610. WE TH FR SA OK TO configurar PICK MULTIPLE DAYS el SCREEN LOCKED 6. Use V/W para tope para rango de temperCHANGE FILTER UV LAMP atura del sistema de refrigeración. 7. Presione DONE (listo).
DONE
M23627
Funciones de la configuración
Done
CONFIGURACIÓN
Next
Done
MS23625
CONFIGURACIÓN
FUNCIÓN
Next
MS24091
3. Presione V/W para configurar el tope para rango de temperatura del sistema de calefacción. 4. Presione NEXT (siguiente) hasta que aparezca la función 28. 5. Presione V/W para configurar el tope para rango de temperatura del sistema de refrigeración. 6. Presione DONE (listo).
Configuraciones y opciones
0600
Tope para rango de temperatura del sistema de 90 calefacción VisionPRO®
La configuración máxima de temperatura es de 90 °F (32 °C) [otras opciones: 40 °F a 90 °F (4,5 °C a 32 °C)]
0610
Tope para rango de temperatura del sistema de 50 refrigeración VisionPRO®
La configuración mínima de temperatura es de 50 °F (10 °C) [otras opciones: 50 °F a 99 °F (10 °C a 37 °C)]
27
Tope para rango de temperatura del sistema de 90 calefacción FocusPRO®
La configuración máxima de temperatura es de 90 °F (32 °C) [otras opciones: 40 °F a 90 °F (4,5 °C a 32 °C)]
28
Tope para rango de temperatura del sistema de 50 refrigeración FocusPRO®
La configuración mínima de temperatura es de 50 °F (10 °C) [otras opciones: 50 °F a 99 °F (10 °C a 37 °C)]
69-2021ES-1. Range Stop Instructions. VisionPRO. ®. Range Stop. Instructions. Enter Installer Setup. 1. Press SYSTEM. 2. Press and hold these two buttons ...
Use / para configurar el tope para rango de temper- atura del sistema de refrigeración. 7. Presione DONE (listo). Instrucciones del tope para rangos. FocusPRO.
tape with Teflon* that resists action of natural and LP gases ... must conform with the current Natural Gas. Installation ... resulting in fire or explosion hazard.
GEAppliances.com. BEFORE YOU BEGIN. ,03257$17 ³Save these .... C. Lift the rear of the oven bottom and slide it back until it clears the lip of the range frame.
Any method of securing the range is adequate as .... until the new hook-up has been completed. Don't forget to .... Set Bake function to 350ƒF. Burner should.
Gas line shut.off valve. □ Pipe joint ... supply line (3/4严 or 1/2严 NPT x 1/2严 I.D.) .... max to cabinets above counter. 2严 Right side. 2严 Left side minimum.
Pressure regulator. Elbow. Elbow. Nipple. Union. Nipple. Gas shut-off valve. 1/2” or 3/4”. Gas pipe. Flexible .... switches that shut off power to the appliance are.
the floor covering can withstand 180°F without shrinking, warping ... Install the anti-tip bracket to the wall or floor. .... Ground Fault Circuit Interrupters (GFCI,s) are.
In Canada, the installation of this range must conform ..... panel under control knobs (if applicable), adhesive tape, wire ties, cardboard and protective plastic.
This range leaves the factory set for use with natural gas. .... backup wrench on the regulator fitting to avoid ... valve, taking care to back-up the shut-off valve.
In Canada, the installation of this range must conform ..... panel under control knobs (if applicable), adhesive tape, wire ties, cardboard and protective plastic.
Gas line shut-off valve. □ Pipe joint sealant or UL-approved pipe thread tape with Teflon* that resists action of natural and propane gases. □ Flexible metal appliance connector (1/2” I.D.). A 5-foot length is recommended for ease of installation but
the installation, switch power off at service panel and lock the service disconnecting means to prevent power from being switched on accidentally. When the ...
the range over carpeting unless a sheet of 1/4” thick plywood or ... purchase, call 1.800.626.8774 to receive one at no cost. (In Canada, call .... be kept clear.
envelope attached to the back of the range. Proper installation is the ... Mobile Home - Additional Installation ..... Cuando dicho estándar no sea aplicable, use el.
you want to convert back to natural gas. ... For all installations, install the required rear trim to back of range with 4 .... tint when well heated or signs of flickering.
contact local gas supplier. Shut off the main gas supply valve before disconnecting the old range and leave it off until the new hook-up has been completed.
Your model may have some or all of the items listed. ... Do not let food sit in oven more than one hour before ... alert you to check the food's doneness with at least 2 minutes remaining on the timer. ... 2. Turn knob to anywhere between Hi and Lo.
between burners and bottom of unprotected wood or ... minimum when bottom of wood or metal cabinet ..... Cuando dicho estándar no sea aplicable, use el.
MAIL TO: P.O. BOX 16347 • Louisville, KY 40256-0347 .... Float switch tether length too short, check valve stuck open, or none installed in long .... BLACK RED.
Standard, Title 24 CFR, Part 3280 (formerly the. Federal Standard .... 13”. Front edge of the range side panel forward from the cabinet. 36”. 401ø2”. 41”. A. 1/4”.
However, the range can tip if you apply too much force or weight to the open door without the ...... be cleaned as soon as the cooktop, grates, and caps are cool.
envelope attached to the back of the range. ... the range over carpeting unless a sheet of 1/4” thick plywood ... the Manufactured Home Construction and Safety.
