VZ 950 Titan Trituradora Hidráulica Universal

SISTEMA DE FLUJO DE AIRE Sistema de circulación de aire optimizado para máximo desempeño. BARRA Y EJE DE RUEDA Maniobra la unidad en terreno con la ayuda de palas cargadoras, montacargas, etc. 3

2

8

VZ 950 CON ORUGAS Mantenga alta maniobrabilidad incluso en terrenos difíciles. CINTA DE DESCARGA Larga cinta de descarga con correa de listones y larga altura de descarga. 7

1

F

6

CONTROL Y MOTOR Equipada con un poderoso motor a diesel de 700 HP Volvo Penta Tier 4f o 770 HP. Panel de control central con pantalla múltiple para monitoreo de información de la máquina.

5

4

MAGNETO SOBRE CORREA Magneto ajustable hidráulicamente para separación de hierro efectiva.

3

2

1

INFORMACIÓN DE VZ950 TITAN Medidas: 425”/453” (trans.) largo x 118” ancho x 169”/142” (trans.) alto Peso: 70,600 lbs. Motor: 700 HP/770 HP Tier 4f en orugas o estacionaria Volumen tolva: 318 cu. ft. Eje: 99” largo x 32” diámetro Peso Cassette: 16,100 lbs. Velocidad rotacional: 15 - 44 RPM Torque: 500,000 ft./lbs. Ancho y velocidad de cinta: 31.5” ancho a 118”/segundo Altura descarga: 11’ 5” F

F

2981

2981

E

E

500

1700 2700

D

4617

2910 4666

D

770

742

3628

E

500

1700 2700

D

2825

2825 10956

BANDIT SE ENORGULLECE EN PRESENTAR SU ALIANZA CON ARJES, LA RECONOCIDA MARCA ALEMANA DE MAQUINARIA DE RECICLAJE. C C Ahora es posible encontrar a dos de los mejores productores mundiales de astilladoras de madera y maquinaria de reciclaje juntos en un sólo lugar.

B

B

C

EXCLUSIVELY DISTRIBUTED BY BANDIT

B

LINE

TLINE HOTLINE HOTLINE HOTLINE HOTLINE / 85 855-0 +49 +49 +49 (0)3695 (0)3695 (0)3695 / 85 / /85 85 855-0 855-0 855-0 +49 (0)3695 / 85 855-0 HOTLINE HOTLINE HOTLINE +49 (0)3695 / 85 855-0 +49 (0)3695 / 85 855-0 PATENTED PATENTED PATENTED HOTLINE PATENTED FT SYSTEM DUAL-SHAFT DUAL-SHAFT DUAL-SHAFT SYSTEM SYSTEM SYSTEM +49 (0)3695 / 85SYSTEM 855-0 DUAL-SHAFT PATENTED HOTLINE DUAL-SHAFT SYSTEM PATENTED +49 (0)3695 / 85 855-0 DUAL-SHAFT SYSTEM HOTLINE PATENTED +49 (0)3695 / 85

855-0

PATENTED DUAL-DISTRIBUTED SHAFT SYS EXCLUSIVELY BYTBANDIT EM +v49 (0)3695 / 85 85FE5 ATURES AT A GLANCE -0

EJE DUAL PATENTADO

Patented T-blad

e

profile PrAT FEATURES AT A GLANCE ecise FEATURES FEATURES FEATURES AT AAT GLANCE AngAGLANCE cutti prGLANCE ocess (energy savings up to 15%) FEATURES AT A GLANCE CARACTERÍSTICAS GENERALES

Cambio rápido de Cassette para sistema de eje Ensamble/desensamble fácil de los ejes, entre una a dos horas, dependiendo de ubicación. Mejor mantenimiento, reacondicionamiento y cambio de ejes para menos detenciones durante la producción.

PATENTED DUAL-SHAFT SYS TEM

Patented T-blade profile Patented Patented Patented T-blade T-blade T-blade profile profile profile Two AT tiltingAhoGLANCE FEATURES Precise cutting process (energy savings pp er s Precise Precise Precise cutting cutting process process process (energy (energy (energy savings savings savings Patented T-blade profile Perfíl cuchilla-T único Opcutting timal feeding of thecorte up to 15%) materprocess ia Proceso de preciso (15% l up to upup 15%) to to 15%) 15%) Precise cutting (energy savings to the tool shaf FEATU RES AT A GLANCE Patented T-blade ts profile FEATURES AT A GLANCE de ahorro de energía) up process to 15%) (energy savings Precise cutting Two tilting hoppers Autotilting mtilting athoppers ic re Pa ve Two tilting Two hoppers hoppers rsing T-blade up to 15%) function automática Optimal feeding of the material toTwo the tool shafts Patented profile tented T-blade profile Función reversa Pr otec ts ag ai ns Pr ecise cutting proce t fra ct Optimal Optimal Optimal feeding feeding feeding of the of of the material the material material ur FEATURES ATehoppers A Two tilting of thGLANCE e cutti Protege herramientas deng corte tools de fracturas Precise cutting process (energy savings ss (energy savin up to 15%) Cribas laterales ajustables hidráulicamente totothe tool thetool shafts tool shafts shaftsfeeding of the material Optimal Automatic reversing function to the Two tilting hoppers Low noise up levetol 15%) Las cribas laterales pueden abrirse o Optimal feeding of the to the toolmaterial shafts diesel Protects against fracture of the cutting tools Poderoso motor Patented profile700 HP Effect iv e sound insula T-blade o tilting hoppers cerrarse hidráulicamente y regular el tion an dGLANCE to the tool shafts FEATURES AT A lowcon Tw enAutomatic También disponible conducción eléctrica gine sp Automatic Automatic reversing reversing reversing function function function Precise cutting process (energy savings eed Op tim al feedin tamaño final del material. La posición de g of the material Two tilting hoppers Powerful diesel engine with 768Protects hpProtects Protects against against against fracture fracture of the ofofthe cutting the cutting tools to cutting thetools up tofracture 15%) Automatic reversing function tootools l sh afts las cribas regula el tiempo en que está Optimal feeding of the material Alto reversing function Also available with electric drive (2Automatic x w250 kW) Lo Patented T-bladefracture profile of the cutting tools wea r an d mairendimiento Protects ntenagainst el material en la cámara de triturado. an ce co stt/h, scutting to the tool shafts Maintenan Protects against fracture of177 the tools Procesa hasta dependiendo del cePrecise friendly cutting process Au(energy tomatic resavings m odhoppers ulA versing function ar de Low Low noise Low noise noise level level level si FEATURES AT GLANCE gn Two tilting material procesado y configuración de Very high throughput Protects against eje up to 15%) fracture of the cuttin Effective Effective Effective sound sound sound insulation insulation insulation and and low and low low Optimal feeding of the material Low noise level g Depending on material and shaft setup Low noise level Automatic reversing function engine engine engine speed speed speed to the tool shafts Effective sound insulation and low Bajoinsulation desgaste costos Patented T-blade profile Effective sound andy low up to 180 t/h Low no APPLICATIONS Protects against fracture ofise thelevcutting tools el WITH HIGH RE Two tilting hoppers engine speed de mantenimiento engine speed Effec Precise cutting process (energy tive sounsavings QUIREMENTS d insulation and low feedingde offácil the material Diseño modular mantención en gin e speed Low wear and maintenance costs LowLow wear Lowwear wear andOptimal and maintenance and maintenance costs costs costs up to maintenance 15%) Automatic reversing function Low noise level to the tool shafts Maintenance friendly modular design Low wear and maintenance costs Maintenance Maintenance Maintenance friendly friendly friendly modular modular modular design design design Protects against fracture of the cutting tools Low wear and maintenance costs Effective sound insulation low Low weand MaintenanceMaintenance friendly modular design ar an d maintenance costs friendly modular design Two tilting hoppers engine speed Maintenance frien dly modular design Automatic reversing function Optimal feeding Low noise level of the material Protects fracture of the cutting tools to the toolagainst shaftsinsulation Effective sound and low Low wear and maintenance costs engine speed Maintenance friendly modular design APPLICATIONS W Low noise level APLICACIONES CON ALTOS REQUERIMIENTOS IT H Automatic reversing function H IG H REQUIREMEN WITH HIGH REQUIREMENTS APPLICATIONS APPLICATIONS APPLICATIONS WITH WITH WITH HIGH HIGH HIGH REQUIREMENTS REQUIREMENTS REQUIREMENTS TS sound insulation and low APPLICATIONS WITH HIGH REQUIREMENTS Effective Protects against fracture of the cutting tools Low wear and maintenance costs APPLICATIONS WITH HIGH REQUIREMENTS engine speed Maintenance friendly modular design

+49 (0)3695 / 85SYSTEM 855-0 DUAL-SHAFT PATENTED DUAL-SHAFT SYSTEM PATENTED DUAL-SHAFT SYSTEM

WAAPPLICATIONS STE WOOD Processing was te wood of categories A 1 to A4 for matAPPLICATIONS erial/thermal re cycling.

APPLICATIONS

WITH HIGH REQUIREMENTS

Low noise level Low wearsound and maintenance Effective insulation andcosts low Maintenance friendly modular design engine speed

GREEN WASTE SCRAP METAL/C For the effectiv AR BODIES W e use of ASTE and maintenance costs Re ducing the volu Low wear or ga ni m WITH cHIGH REQUIREMENTS solid reso e urces Self-cleaning sh of valuable ferr Maintenance friendly afts prmodular event design in bio-power pl ous and ants. th e machine from non-ferrous met clogging als. by the mix of m aterials. WITH HIGH REQUIREMENTS

WASTE WOOD GREEN WASTE Processing waste SCw RAw Pw MET wo od ARdBODIES WAS APPLICATIONS WITH HIGH REQUIREMENTS For the effective us .aAL rj/C es. TE e e of of catego WASTE WOOD SCRAP METAL/CAR BODIES WASTE GREEN WASTE Redu ries A1 to A4 for cin g th e volume organic solid resour Se lfcle aning shafts pr DESECHO DE MADERA RAÍCES/TRONCOS CHATARRA/CARROCERÍAS DESECHOS ce ma s BODIES Reducing the volume Self-cleaning prevent Processing For the effective use of SCRAP riaWASTE l/theLOGS of va rmal re luaWASTE WASTE WASTE WOOD WOOD WOOD waste woodGREEN SCRAP METAL/CAR METAL/CAR METAL/CAR BODIES BODIES WASTE WASTE GREEN GREEN WASTE WASTE ble cycli BODIES WASTE WASTE WOOD ROOTS /te TREE ferrousshafts ng. WASTE and inSCRAP bio -power plants. the machine from clog therro machine from clogging ofReducing valuable ferrous and non-Self-cleaning of categories A1wood to A4 For forLos organic solid resources Procesa desechos de agresivos ganchos Reducción de volumen Ejes auto-limpieza us mecon WASTE WOOD METAL/CAR WASTE GREEN WASTE tals. Reducing theSCRAP the volume the volume volume Self-cleaning Self-cleaning shafts shafts shafts prevent prevent prevent Processing Processing Processing waste waste waste wood wood For the For the effective theeffective effective use use of useofof Reducing e Self-cleaning shafts prevent feBODIES Processing waste wood Our aggressive ripper by the mix of materials by the mix of materials. non-ferrous metals. y material/thermal in bio-power plants. madera para material recycling. desgarradores rompen de fierros valiosos previenen que la máquina

nd

Reducing the volume Self-cleaning shafts prevent Processing waste wood For the effective use ofof thethe machine themachine machine from from from clogging clogging clogging ofthe valuable valuable valuable ferrous ferrous ferrous and and and ofofcategories ofcategories ofcategories categories A1A1A1 toto A1 A4 toA4 toA4 for A4 organic organic solid solid solid resources resources resources machine from clogging forforfororganic hooks first break the

categoría A1 of a A4 para primero el material de resources metales no-férreos. se atorethe conmachine la variedad from clogging of valuable categories A1 toinmassive A4 organic solid the bybythe mix themix of mix materials. ofofmaterials. materials. non-ferrous non-ferrous metals. metals. metals.ferrousbyand material/thermal material/thermal material/thermal recycling. recycling. recycling. bio-power ininfor bio-power bio-power plants. plants. plants. bynon-ferrous the mix of materials. material/thermal recycling. material. material/reciclaje térmico. gran tamaño al procesar. de materiales.

by the mix of materials. non-ferrous metals.BODIES WASTE material/thermal in bio-power plants. WASTE WOOD recycling. GREEN SCRAP METAL/CAR WASTE w w.arjes Reducing the volume Self-cleaning shaftswprevent Processing waste wood For the effective use of www.arjes.de WWW.BANDITCHIPPERS.COM • (989) 561-2270 • [email protected] PARA MÁS INFORMACIÓN the machine from clogging of valuable ferrous and of categories A1 to A4 for organic solid resources VZ950_1871-18_0518E