Reemplazo de la tarjeta MicroSD de Blu Studio HD 6.0

Esta guía le ayudará a reemplazar o instalar una tarjeta micro SD para la expansión de almacenamiento. Escrito por: Alec. Reemplazo de la tarjeta MicroSD de ...
732KB Größe 0 Downloads 0 vistas
Blu Studio HD 6.0 MicroSD Card Replacement

ID de guía: 30666 - Borrador: 2015-01-10

Blu Studio HD 6.0 MicroSD Card Replacement This guide will help you replace or install a micro sd card for storage expansion.

Escrito por: Alec

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 1 de 6

Blu Studio HD 6.0 MicroSD Card Replacement

ID de guía: 30666 - Borrador: 2015-01-10

INTRODUCCIÓN Installing a Micro-SD card is a quick and easy way to expand your device's storage. Follow this guide to install your Micro-SD card correctly.

PARTES: 16 GB SD Card (1)

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 2 de 6

Blu Studio HD 6.0 MicroSD Card Replacement

ID de guía: 30666 - Borrador: 2015-01-10

Paso 1 — Rear Case 

Begin by making sure your Blu Studio is turned off.

Paso 2 — Back Panel.



To begin the removal of your back panel, first locate the lift tab on the bottom-right corner.

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 3 de 6

Blu Studio HD 6.0 MicroSD Card Replacement

ID de guía: 30666 - Borrador: 2015-01-10

Paso 3



Next, gently slide your thumb (or plastic tool if you prefer) down the seem running the length of your Blu Studio until the rear panel is completely removed.



Your rear panel should be placed nearby and in a safe location until you are finished with your task.

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 4 de 6

Blu Studio HD 6.0 MicroSD Card Replacement

ID de guía: 30666 - Borrador: 2015-01-10

Paso 4 — Insert the Micro-SD Card



Find the Micro-SD card slot which is under the right SIM card slot.



Line up the gold pins of the Micro-SD card with the pins of the card slot. If pins in the slot are hidden, then insert the Micro-SD card with the "MicroSD" print up and the pins facing the slot.



Slide the card into the slot until you either hear a clicking noise or until the card does not move anymore. Do not apply too much force; gently slide it in and stop immediately when it does not move anymore.

Paso 5 — Turn the phone on 

Your phone should boot up and ask you to format your Micro-SD Card.



Format the card and you're good to go.

 If your phone does not recognize the card, ensure that the gold pins of the card aligned with the gold pins on the phone's Micro-SD slot.

 If the card is installed correctly, the card may be faulty. If so contact the Micro-SD card manufacturer.

To reassemble your device, follow these instructions in reverse order. © iFixit — CC BY-NC-SA

es.iFixit.com

Página 5 de 6

Blu Studio HD 6.0 MicroSD Card Replacement

ID de guía: 30666 - Borrador: 2015-01-10

La versión más reciente de este documento fue generada en 2019-08-10 06:27:27 AM .

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 6 de 6