EN Product Safety Information Intended Use: These Air Grinders are designed for material removal or cutting off using a rotated abrasive wheel, in accordance with the product specification table.
WARNING ● Failure to observe the following warnings, and to avoid these potentially hazardous situations, could result in death or serious injury. ● Always turn off the air supply, bleed the air pressure and disconnect the air supply hose when not in use, before installing, removing or adjusting any accessory on this tool, or before performing any maintenance on this tool or any accessory. ● Do not attempt to disassemble the internal Speed Controller. It is available only as a unit. ● Before installing a new Arbor Housing Assembly, always select the correct Nameplate Kit and secure it to the Arbor Housing with the Nameplate Screws. For additional information refer to Product Safety Information Manual Form 04584959. Manuals can be downloaded from ingersollrandproducts.com
These die grinders are designed for grinding, porting, polishing, de-burring, and ... For Additional information refer to Air Die Grinder Product Safety Information ...
condensate from valve(s) at low point(s) of piping, air filter and compressor tank daily. Install a properly sized Safety Air Fuse upstream of hose and use an ...
Regolatore. Fusibile di sicurezza. 3. Lubrificatore. 9. Olio. 4. Valvola di arresto di emergenza. 10. Ingrassaggio - durante il montaggio. 5. Diametro tubo flessibile.
Notera: Slipningsvinkeln ska vara samma som spetsens tidigare vinkel. 3. Vrid slipgiggen mot slipskivan när du slipar spetsen. Slipa tills det att spetsen är vass.
For additional information refer to Air Die Grinder Product Safety Information Manual. Form 04580288. Manuals can ..... Spanbekafmeting. 9 + Druk #Vermogen.
+ K = 3dB measurement uncertainty ... *K=Vibration measurement uncertainty ... Size air supply line to ensure tool's maximum operating pressure (PMAX) at tool ...
For additional information refer to Hand-held Electric Angle Wrench, Screwdriver or Nut. Runner used with a Controller Product Safety Information Manual Form 16573685. .... Final torque adjustment should be made at the job through a series.
The lubricator listed in the parts list has a capacity of 1 U.S. pint (0.47 liters) ... Ingersoll Rand Rock Drill Oil Part Numbers. Grade. 1 Gallon .... Adjust the air line lubricator so that the paving breaker tool always shows an oil film. There sh
Install a properly sized Safety Air Fuse upstream of hose and use an anti-whip ... coupling without internal shut-off, to prevent hose whipping if a hose fails or ...
Other languages are a translation of the original instructions,. Tool repair and maintenance ..... fehlerhaft ist oder sich eine Verbindung löst. Siehe Zeichnung ...
threaded fasteners. Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious ...
These tools are designed to remove and install threaded fasteners. WARNING. This tool must be used with a compatible Controller approved by Ingersoll Rand.
Size air supply line to ensure tool's maximum operating pressure (PMAX) at tool inlet. Drain at low point(s) of piping, air filter and compressor tank daily. Install a.
Refer all communications to the nearest Ingersoll Rand Office or Distributor,. EN-2. 04580395_ed4 ..... Die Originalanleitung ist in englischer Sprache verfasst.
For additional information refer to Air Impact Wrench Product Safety .... When the life of the tool has expired, it is recommended that the tool be disassembled,.
These Air Percussive Hammers are designed for hammering, punching, ... When the life of the tool has expired, it is recommended that the tool be disassembled,.
For Additional information refer to Air Die Grinder Product Safety Information ..... Reparatie en onderhoud van dit gereedschap mogen uitsluitend door een ...
For models that include a power management system, the system allows operator ... *K. Free Speed Sound Level dB(A). (ISO15744). Pressure Power. 94.1 ..... Per i modelli dotati di sistema di regolazione della potenza, l'operatore può ridurre ...
Be alert for any existing water, gas, electricity, sewer, or telephone lines. Always keep .... Do not lift or transport the breaker by the throttle lever. Damage can ...
*K=Vibration measurement uncertainty. Sound and vibration values were measured in compliance with internationally recognized test standards. The exposure ...
1 jun. 2007 - Maintenance Information Manual 45530136, located at www.irtools.com, or contact the nearest. Ingersoll Rand Office or Distributor. WARNING.
