Special Tec F 5W-30 Description Low-friction engine oil based on synthesis technology. It safely prevents deposits, features extreme shear stability, reduces friction losses in the engine and offers excellent protection against wear and tear. Ideally suited for modern gasoline and diesel engines with or without multi-valve technology, Valvetronic, exhaust-gas turbochargers and with or without diesel particulate filter (DPF) and charge air cooling. Especially recommended for long oil change intervals and high engine performance requirements.
Properties - optimum stability to aging - high lubrication reliability - rapid oil delivery at low temperatures - tested for turbochargers and catalytic converters - high engine cleanliness - saves fuel and reduces pollutant emissions - high shear stability
Technical data Pour point
-45 °C DIN ISO 3016
Evaporation loss (Noack)
12,0 % CEC-L-40-A-93
Total base number
11,1 mg KOH/g DIN ISO 3771
Sulfate ash
0,85 g/100g DIN 51575
Color number (ASTM)
L3,5 DIN ISO 2049
Specifications and approvals: ACEA A5 ∙ ACEA B5 ∙ Ford WSS-M2C 913-D ∙ Jaguar / Land Rover STJLR.03.5003
LIQUI MOLY also recommends this product for vehicles or assemblies for which the following specifications or original part numbers are required: Fiat 9.55535-G1 ∙ Ford WSS-M2C 913-A ∙ Ford WSSM2C 913-B ∙ Ford WSS-M2C 913-C
Technical data SAE class (engine oils)
5W-30 SAE J300
Density at 15 °C
0,855 g/cm³ DIN 51757
Viscosity at 40 °C
52,4 mm²/s ASTM D 7042-04
Viscosity at 100 °C
9,9 mm²/s ASTM D 7042-04
Areas of application The latest Ford specification (WSS-M2C 913 C) primarily applies to various vehicle types from year of manufacture 2009. However, Leichtlauf Special F 5W30 is backwards compatible and can be used in older Ford vehicles from 7/1998 without hesitation as well. Besides, a lubricant meeting this specification is demanded by manufacturers such as Land Rover, Rover/MG, Jaguar, Mazda and Citroen for use in different vehicle types. Not suited for VW vehicles with service interval extension!
Application The operating instructions of the vehicle and engine manufacturers must be followed.
Available pack sizes 1 l Canister plastic
3852 D-F-I
Viskosität bei -35°C (MRV) < 60000 mPas ASTM D4684
These die grinders are designed for grinding, porting, polishing, de-burring, and ... For Additional information refer to Air Die Grinder Product Safety Information ...
condensate from valve(s) at low point(s) of piping, air filter and compressor tank daily. Install a properly sized Safety Air Fuse upstream of hose and use an ...
Regolatore. Fusibile di sicurezza. 3. Lubrificatore. 9. Olio. 4. Valvola di arresto di emergenza. 10. Ingrassaggio - durante il montaggio. 5. Diametro tubo flessibile.
Notera: Slipningsvinkeln ska vara samma som spetsens tidigare vinkel. 3. Vrid slipgiggen mot slipskivan när du slipar spetsen. Slipa tills det att spetsen är vass.
For additional information refer to Air Die Grinder Product Safety Information Manual. Form 04580288. Manuals can ..... Spanbekafmeting. 9 + Druk #Vermogen.
+ K = 3dB measurement uncertainty ... *K=Vibration measurement uncertainty ... Size air supply line to ensure tool's maximum operating pressure (PMAX) at tool ...
For additional information refer to Hand-held Electric Angle Wrench, Screwdriver or Nut. Runner used with a Controller Product Safety Information Manual Form 16573685. .... Final torque adjustment should be made at the job through a series.
The lubricator listed in the parts list has a capacity of 1 U.S. pint (0.47 liters) ... Ingersoll Rand Rock Drill Oil Part Numbers. Grade. 1 Gallon .... Adjust the air line lubricator so that the paving breaker tool always shows an oil film. There sh
Install a properly sized Safety Air Fuse upstream of hose and use an anti-whip ... coupling without internal shut-off, to prevent hose whipping if a hose fails or ...
Other languages are a translation of the original instructions,. Tool repair and maintenance ..... fehlerhaft ist oder sich eine Verbindung löst. Siehe Zeichnung ...
threaded fasteners. Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious ...
These tools are designed to remove and install threaded fasteners. WARNING. This tool must be used with a compatible Controller approved by Ingersoll Rand.
Size air supply line to ensure tool's maximum operating pressure (PMAX) at tool inlet. Drain at low point(s) of piping, air filter and compressor tank daily. Install a.
Refer all communications to the nearest Ingersoll Rand Office or Distributor,. EN-2. 04580395_ed4 ..... Die Originalanleitung ist in englischer Sprache verfasst.
For additional information refer to Air Impact Wrench Product Safety .... When the life of the tool has expired, it is recommended that the tool be disassembled,.
These Air Percussive Hammers are designed for hammering, punching, ... When the life of the tool has expired, it is recommended that the tool be disassembled,.
For Additional information refer to Air Die Grinder Product Safety Information ..... Reparatie en onderhoud van dit gereedschap mogen uitsluitend door een ...
For models that include a power management system, the system allows operator ... *K. Free Speed Sound Level dB(A). (ISO15744). Pressure Power. 94.1 ..... Per i modelli dotati di sistema di regolazione della potenza, l'operatore può ridurre ...
Be alert for any existing water, gas, electricity, sewer, or telephone lines. Always keep .... Do not lift or transport the breaker by the throttle lever. Damage can ...
*K=Vibration measurement uncertainty. Sound and vibration values were measured in compliance with internationally recognized test standards. The exposure ...
1 jun. 2007 - Maintenance Information Manual 45530136, located at www.irtools.com, or contact the nearest. Ingersoll Rand Office or Distributor. WARNING.
