Morphy Richards Hierro desmontaje

29 dic. 2016 - ... retire el soporte del puente de cable. ... botón (círculo rojo) aflojando los tornillos (círculo ... puente de la posición de las flechas.. Paso 10.
9MB Größe 8 Downloads 93 vistas
Morphy Richards Iron Teardown

Morphy Richards Iron Teardown Escrito por: RIchard fox

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 1 de 13

Morphy Richards Iron Teardown

HERRAMIENTAS: Flathead Screwdriver (1)

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 2 de 13

Morphy Richards Iron Teardown

Paso 1 — Morphy Richards Iron Teardown 

This is the iron we will take apart.



First remove the rear or the iron using the flathead screwdriver.

Paso 2

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 3 de 13

Morphy Richards Iron Teardown

Paso 3 

Next remove the cable bridge bracket.



Next remove the screws from the base. (see arrows for location)

Paso 4

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 4 de 13

Morphy Richards Iron Teardown

Paso 5 

Next remove the screw the hold the top on.



To free the long cable remove from terminal block at rear.

Paso 6

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 5 de 13

Morphy Richards Iron Teardown

Paso 7 

At the front of the iron pull out the buttons for the steam and water.



Next unclip the button holder (red circle) by undoing the screws (black circle)

Paso 8

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 6 de 13

Morphy Richards Iron Teardown

Paso 9 

Next remove the bridge clip from the arrows position.



Next remove the inner button (black circle)



Now remove the centre screw (red arrow)

Paso 10

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 7 de 13

Morphy Richards Iron Teardown

Paso 11 

slide off the cable holder from the cable.



Disassemble the plug



First remove the casing.



Now remove the wires from the pins.



Next remove the pins.

Paso 12

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 8 de 13

Morphy Richards Iron Teardown

Paso 13 

Remove front of the iron by undoing the screw (arrow) by first taking off cover cap.



Next take out round selector, this is simply clipped so can be pulled out with pliers.

Paso 14

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 9 de 13

Morphy Richards Iron Teardown

Paso 15 

Next remove the washer parts at the front of the iron.



Take the tubing off.



Remove the seals for the water pump.



Now take pumps out.

Paso 16

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 10 de 13

Morphy Richards Iron Teardown

Paso 17 

Remove the screw (circled) this will lead to the separation of the base and the top.



Remove the top of the iron to reveal the under parts.



Now remove the rubber seals from the plate.



Take out the screws linking to the stainless steel base.

Paso 18

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 11 de 13

Morphy Richards Iron Teardown

Paso 19 

Remove the terminal block from the wires.



Next take off the black section of the iron.



Now remove the screws from the steel base.

Paso 20

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 12 de 13

Morphy Richards Iron Teardown

Paso 21 

Next remove each individual part ( mostly wiring)



All parts at the end of the process.

Paso 22

To reassemble your device, follow these instructions in reverse order. La versión más reciente de este documento fue generada en 2017-09-13 07:09:31 PM .

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 13 de 13