1 jul. 2010 - to quickly determine run distances for bidding, distance of piping run, measuring trouble spots down the line and quickly determine spacing for ...
micro LM-100 Laser Distance Meter The RIDGID® micro LM-100 Laser Distance Meter provides simple, quick and accurate distance readings at the push of a button. Simply push the measurement button to turn on the Ultra-Sharp Class II lasers, point the device at remote, hard-to-reach places and push the measurement button. A quick distance reading will appear on the easy to read LCD display. This rugged, compact, portable instrument enables professional tradesman to quickly determine run distances for bidding, distance of piping run, measuring trouble spots down the line and quickly determine spacing for code compliance. • Ultra Sharp Class II Lasers clearly highlight the point being measured. • Exceptional Distance Range allows accurate measurements up to 164 feet (50m). • Adjustable Units enable you to quickly read in feet, inches or meters on the fly. • Bright Backlit Display for use in poorly lit areas. • Quick and Accurate calculations on the spot. • Displays up to the last three measurements, stores the last 20 measurements. • Rugged Over Molding allows you to keep a solid grip in the harshest of industrial environments.
Specifications • • • • • •
Measurement Accuracy..............±1/16 inch, (1.5mm) Range.........................................164 feet (50m) Measurement Units ....................inches, feet, meters Measurement Calculations.........Area, Volume, and Indirect measurement calculations Power Source.............................2 AAA batteries IP Rating.....................................IP 54
FULL LIFETIME WARRANTY Against Material Defects & Workmanship
Ordering Information Catalog No. 36158
Model No. micro LM-100
Wt. Description Laser Distance Meter
lb. .5
kg .2
Std. Pack 1
RIDGID® • 400 Clark St., Elyria Ohio 44035-6001 U.S.A. • Visit us on the Internet: www.RIDGID.com All sales subject to Ridge Tool Company Terms and Conditions of Sales.
In this operator's manual and on the product, safety symbols and signal words are used to ..... erence point to the front edge (laser end) of the meter. The meter.
Ekipmanı alev alabilen sıvıların, gazların ya da tozların olduğu patlayıcı ortamlarda kullanmayın. Ekip man toz ya da gazları tutuşturabilecek kıvılcımlar üretebilir.
In this operator's manual and on the product, safety symbols and signal words are used to ..... urement reference point to the front edge (laser end) of the meter.
as in the presence of flammable liquids, gases or dust. Equip ment can create sparks which may ignite the dust or fumes. • Keep children and by-standers a way ...
Keep children and by-standers away while operating equipment. ... come hazardous when used with other equipment. • Keep handles ...... Appliquez les me- sures de verrouillage appropriées afin d'éviter leur remise en marche en cours d'inspection. S'il
Ekipmanı alev alabilen sıvıların, gazların ya da tozların olduğu patlayıcı ortamlarda kullanmayın. Ekipman toz ya da gazları tu- tuşturabilecek kıvılcımlar üretebilir.
RIDGID 300 Power Drive for use in the field or shop. Also available is the new RJ624 Large Diameter Pipe Support for grooving pipe up to. 24″ in diameter, a ...
1 sept. 2011 - Get the perfect view with enhanced features like image rotation and ... For the complete selection of the RIDGID product line, please refer to the ...
58°F to 1472°F. (-50°C to 800°C). Distance To Spot Ratio .................20 to 1 for one piece of equipment may become hazardous when used with other equipment.
Factory reset. Digital 6000 System Instruction Manual. Temp out of range, charging stopped. Battery in regeneration. Battery damaged. Charging 0 % – 80 %.
ators, ranges and refrigerators. There is an increased risk of electrical shock if your ..... cessory over the flats of the imager head. Then rotate the accessory .... Determine the access points to the space. The minimum opening the cam - era head .
Please make sure that the container and its contents are safe to heat to the set temperature. 1. Before using the heating jacket, check the distributor manifold and ...
Longitud del cordón: 10 pies. • Aprobado por UL sí. • Filtros de reemplazo:VF3500, VF3501. • Tamaño del accesorio: 17/8". • Peso neto: 10,5 b. Equipo normal.
Do not try to use the 975. Combo Groover ... Move the cutter, reamer and die head in to the posi- tion away ... Position reamer cone inside of die head. schedule ...
modify the plug in any way. Do not use any .... Recharge only with the charger specified by the ... keep this manual with the machine for use by the operator.
Remote Network (Sennheiser WSM). * to be ordered separately. * to be ordered ... Sennheiser Documentation App or online at www.sennheiser.com/download.
