4 ene. 2011 - 1) Align the fixture ring with the fixture ribs. 2) Seat the cowl assembly over the face of the landscape fixture. 3) By hand, squeeze the edge of ...
INSTRUCCIONES DE INSTALACIÓN Modelos 15701, 15702, 15703, 15704
READ THESE INSTRUCTIONS FIRST.
LEA ESTAS INSTRUCCIONES ANTES.
SAVE FOR FUTURE REFERENCE.
GUÁRDELAS PARA REFERENCIA FUTURA
1) Align the fixture ring with the fixture ribs. 2) Seat the cowl assembly over the face of the landscape fixture. 3) By hand, squeeze the edge of the cowl assembly until it snaps over the fixture face. 4) Rotate the cowl until the desired shielding is obtained.
1) 2) 3) 4)
Alinee el anillo del artefacto con las costillas del artefacto. Siente el conjunto de la capucha encima de la cara del artefacto de alumbrado ornamental. A mano fuerce el borde del conjunto de alumbrado ornamental hasta que se arme encima de la cara del artefacto. Gire la capucha hasta que se obtenga la pantalla o resguardo deseado.
COWL ASSEMBLY conjunto de la capucha
For warranty information please visit: http://www.landscapelighting.com/portal/warranty_page Para informacion de ka garantia por favor visite: www.landscapelighting.com/portal/warranty_page Date Issued: 4/1/11
1) Align the fixture ring with the fixture ribs. 2) Seat the cowl assembly over the face of the landscape fixture. 3) By hand, squeeze the edge of the cowl assembly ...
50, 90, 140, 145/4145, 151, 371 and 372 Series have ½”, 130 Series has 5/8”, 152, 153 and 160/4160/180/4180 and 373 models have ¾”.) Where code permits, sewage pumps can be used for effluent systems. Non-automatic pumps with external-level controls a
50, 90, 140, 145/4145, 151, 371 and 372 Series have ½”, 130 Series has .... to A.C. power disruptions, mechanical or electrical problems or system ..... durante un período de tres años a partir de la fecha de fabricación original del producto.
GRASS CLIPPINGS, MULCH, OR ANY DEBRIS THAT HAS ACCUMULATED ON THE. LIGHT BULB, LENS, OR BODY OF THE FIXTURE. ASSEMBLY AND INSTALLATION. 1) Determine desired location for mounting fixture. 2) At desired location, hammer stake (A) into ground. To avoid
4 oct. 2012 - Large: 30W models. Remove protective film on the impact guard lens. Insert the lens into the corresponding slots of the visor by flexing the visor.
to the lamp or fan (LOAD) to the red wire on the ... NEUTRAL. Red ->LOAD (power to lamp or fan) ... and workmanship for a period of five (5) years. There are no ...
SHIP TO: 3649 Cane Run Road • Louisville, KY 40211-1961. (502) 778-2731 • 1 (800) 928-PUMP • FAX (502) 774-3624 visit our web site: www.zoeller.com. ®. Your Peace of Mind is Our Top Priority® .... Product on our website: .... Gate valve, shut-off val
power off at the service panel and lock the service ...... ou scie alternative. Cisailles à étain ...... NOTE: While performing installations described in this book,.
r To assure proper positioning in relation to wall, note roughing-in dimensions. Product names listed herein are trademarks of AS America, Inc. ? AS America ...
your appliance, follow basic precautions, including the following: â¡ Read all .... If the problem persists, call GE Appliances at 800. GE.CARES ...... WiFi Connect (For customers in the United States only - on some models). Depending on the ...
Keep flammable materials and vapors, such as gasoline, away from refrigerator. Failure to ...... When pushing the refrigerator back, make sure you don't roll over ...
period, before using a washing machine, turn on all hot-water faucets and let the ... GE Appliances strongly recommends the use of new water supply hoses.
If the refrigerator is operated before the water connection is made to the ice maker, ..... plumber to correct water hammer before installing the water supply line to ...
piping system by closing its individual manual shut-off valve during any pressure testing of the gas supply piping system at test pressures equal to or less than ...
the air back into the room, proceed to page 6. Below are examples of ... For satisfactory air movement, the total duct length of. 31»4 ..... Lift microwave, tilt it forward and unhook slots at ..... Un electricista calificado deberá realizar un contr
If the above checklist does not uncover the problem, consult the factory. Do not attempt to service or otherwise disassemble pump. Service must be performed by Zoeller Authorized Service Stations. Go to www.zoellerpumps.com/servicestations to find th
If the installation does not have such a receptacle, it must be changed to the proper type, wired ... marine areas. 11. ..... As tether length increases, so does the.
applicable codes and standards, including fire.rated construction. ... published by the National Fire Protection. Association (NFPA) .... use the High. Ceiling Duct.
Before the washer is removed from service or discarded, remove the door or lid. Failure to ...... Scan this code .... adequate clearance for installation and service.
dimensions shown. The middle rail separating the two openings may need to be larger than the 2” minimum shown. Construct solid bottom -. Min. 3/8” plywood.
