REGULATORY COMPLIANCE INFORMATION
T AF
R
D
Avery Dennison products are designed to be compliant wi th the rules and regulati ons in the locations into which they are s ol d and will be l abel ed as requi red. Any changes or modi ficati ons to Av ery Dennis on equi pment not expressl y approved by Av ery Dennison coul d void the us er authority to operate the equi pment. Follow all cautions and instructions mark ed on the produc t. Do not operate Avery Dennison products without the covers in plac e. It may damage the product or cause pers onal injury. Never push obj ec ts of any kind through openings in the equipment. Dangerous voltages might be present and cause fi re, elec tric shock, or damage to the p ri nter. Do no t bl ock or co ver the op enings of the equipment. Do not pl ac e the product near a radi ator or heat register. It could cause the product to ov erheat. Av ery Dennison produc ts are designed to work wi th power systems that hav e a grounded neutral (grounded return for DCpowered products). Do not plug an Av ery Denni son produc t into any other type of power system. This could caus e electric shoc k. Contact your faciliti es manager or qualified electrician if you are not sure what power supply you have. The power cord serv es as the primary di sconnect for the product. Plug the power cord into a nearby grounded power outlet. Do not connect the power cord when the power supply has been removed from the produc t. Refl ected light from the di splay may cause annoyance or discomfort. Take steps to mini mize the glare, such as moving the printer. The produc t is not suitable for us e at visual display work pl ac es acc ordi ng t o §2 of the Ge rman Or di nance for Work with Visual Display Units.
TC9800RCD Rev. AK DRAFT 9/10
2007 Avery Dennison Corp. All rights reserved.
Copyright Information
R
D
E ac h p roduc t and p rogram carries a r espec tiv e wr i tten warranty, the only warranty on which the customer can rely. Avery Dennison Corp. reserves the right to make changes in the produc t, the programs, and thei r avai labi lity at any ti me and wi thout notice. Al though Av ery Dennison Corp. has made ev ery e ffort to pr ovi de co mplete an d ac curate information in this manual, Avery Dennison Corp. shal l not be liable for any omissions or inac curacies. Any update will be incorporated in a later edition of this manual . No part of this publication may be reproduc ed, trans mi tted, stored in a retrieval system, or translated into any language in any form by any means, wi thout the prior written permission of Avery Dennison Corp. Information in this doc ument supercedes information in previous versions.
Trademark Credits
T AF
Monarch, MonarchNet2, 7411, 9825, 9844, 9854, 9855, 9860, and 9864 are trademarks of Av ery Dennison Retail Information Services LLC. Avery Dennison® is a trademark of Av ery Denni son Corporation. Avery Dennison Printer Systems Di vision 170 Monarch Lane Miamisburg, OH 45342
Waste Electrical and Electronic Equipment (WEEE) for European Union (EU) Customers
Avery Dennison is fully committed to achieving the EU mandated WEEE di rectives. This product, its components, and accessories must be sent to a designated collection facility for proper disassembly and dispos al in accordance wi th the W EEE di rec tiv es . Any produc t or accessory marked with the WEEE symbol must 2
WEEE Symbol
be returned to a designated collection facility. For proper dispos al of the printer outside of the U.S., send the printer and its accessories to: EMEA, 4 Awberry Court Croxley Business Park, Hatters Lane, Watford, WD18 8PD
FCC Regulations – Class A
D
T AF
R
WARNING This equi pment has been tested and found to comply wi th the limits for a Class A di gi tal device, pursuant to Part 15 of the FCC Rules. Thes e limits are designed to provide reasonable protecti on agai nst harmful interference when the equi pment is operated in a commercial environment. This equi pment generates, uses, and can radiate radi o frequency energy and, if not installed and used in accordance wi th the instruction manual, may caus e harmful interference to local radi o communic ations . Operati on of this equi pment in a residenti al area is likel y to cause harmful interference, in which case the us er will be required to correct the interferenc e at thei r own expense. CANA DIAN D.O.C. WARNING This di gi tal apparatus does not exceed the Cl ass A limits for radi o nois e em issi ons f rom di gi tal ap paratus set o ut i n t he Radi o Interference Regulations of the Canadian Department of Communications . Le prés ent appareil numéri que n'émet pas de bruits radi oélectri ques dépassant les limites applicabl es aux appareils numériques de la classe A prescrites dans le Régl ement s ur le brouill age radi oél ec trique édic te par l e mini stère des Communications du Canada.
3
802.11b/g Regulatory Compliance Information (if installed)
R
D
This sec ti on de tails the r egu latory complianc e information specific to the wi reless components in your printer. It may not appl y to other RF devices in the printer. Refer to the documentation provided wi th thos e other RF devices for regulatory information. Av ery Dennison RF produc ts are designed to be compliant with the rules and regulati ons in the locations into which they are sold and wi ll be labeled as required. The majority of Avery Dennison RF devices are type approv ed and do not require the user to obtain a licens e or authorization before using the equipment. Check your local regulations for more spec ific information. Any changes or modi ficati ons to Avery Dennison equi pment not expressly approved by Av ery Dennison coul d void the us er authority to operate the equi pment. Changes or modificati ons not expressl y a pproved by t he pa rty r esponsibl e f or c ompli ance could void the us er's authority to operate the equipment. FCC RF Exposure Guidelines
T AF
To comply wi th FCC and Industry Canada expos ure requirements , if this device is a tabl e-top device, it is approved for operation when there is 20 cm or more between the antenna and the us er’s body. Declaration of Conformity for RF Exposure:
The ra di o m odule has be en evaluated u nder F CC Bull etin OET 65C and found compliant to the requirements as set forth in CFR 47 Sections 2.1091, 2.1093, and 15.247 (b) (4) addressing RF Exposure from radi o frequency devices. Radio Frequency Interference Requirements
This device complies wi th part 15 of the FCC Rules. Operation is subj ec t to the following two conditions : (1) This device may not cause harmful interference, and (2) this 4
dev ice mus t acc ept any in terferenc e rec eiv ed, inc ludi ng interferenc e that may cause undesired operation. Caution: The Part 15 radi o device operates on a noninterferenc e basis with other devices operating at this frequency when using the listed antenna. Radio Frequency Interference Requirements - Canada
R
D
This device complies wi th RSS 210 of Industry Canada. Operation is subj ec t to the following two conditions : (1) this device may not cause harmful interference and (2) this dev ice mus t acc ept any in terferenc e rec eiv ed, inc ludi ng interferenc e that may cause undesired operation. This Cl ass A digital apparatus meets the requi rements of the Canadian Interferenc e-Causing Equipment Regul ations . Cet appareil nu méri que d e la Cl ass e A esp ec te to utes les exigencies du Reglement sur le Materi él Brouilleur du Canada. European Economic Area
T AF
The optional print server and its built-in 802.11b and 802.11g wi reless technology are in compliance with the Cl ass A Information Technology Equipment requirements and other relevant provisions of European Di rective 1999/5/E C. The limits for Class A equipment were deri ved for typical commercial environments to provide reasonable protec ti on agai nst i nterferenc e wi th lic ensed co mmuni cati ons devic es . The internal func ti on is a radio dev ice using the 2.4 GHz frequency band (2.400GHz – 2.4835GHz ). It is intended for wi reless communication wi th other 802.11b and 802.11genabled devices in an indoor environment. The use of 802.11b an d 80 2.11g wi rel ess tec hnol ogy in c ertai n c ountri es may be restricted. Before using 802.11x products , pl ease confirm wi th the frequency management authority in the country where you pl an to us e it. Many countries allow indoor us e only. To prev ent radi o interference to the
5
licensed service, this dev ice is intended to operate indoors and away from wi ndows to provide maximum shielding. The European vari ant is intended for use throughout the E uropean Ec onomic A rea; ho wev er, au thoriz ati on f or use is restricted as follows:
R
D
European standards dictate the maxi mum radi ated transmit power of 100 mW EIRP and frequenc y range 2.400 – 2.4835 GHz. France, the equi pment is to be restricted to the 2.4465 – 2.4835 GHz frequenc y range. Belgium outside, the equipment is to be restricted to the 2.460 – 2.4835 GHz frequency range. Operation in Ital y requires a us er licens e.
CE Marking & European Union Compliance
T AF
Produc ts intended for sale wi thin the European Union are mark ed wi th the CE Mark wh ic h i ndicates co mplianc e to applicable Di rectives and European Normes (EN), as follows. Amendments to thes e Di rectives or Ens are included: Normes (EN), as f oll ows . IMPORTANT NOTICE: This device is an 802.11 wireless printer/RF device intended for office and warehouse use in all EU and EFTA member states except where restricted use applies (as shown in the chart below). Please refer to the users manuals for further details.
Collocation Statement:
This device must not be collocated within 20cm of any other antenna or transmitter. EU - European Union: Austri a, Belgium, Bulgaria, Cyprus , Czech Republic, Denmark, Estonia, Fi nl and, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Li thuania,
6
Luxembourg, Malta, Netherlands, Poland, Portugal , Romani a, Slov akia, Slovenia, Spai n, Sweden, United Ki ngdom. AB
DK
FIN
FD
IRL
I
CHE NOR S UK
NL
P
L
SR
D
ISL E
T AF
EN 60950: Safety of Information Technology Equipment (ITE). EN 301 489-1 & -17: ElectroMagnetic Compatibility (EMC) standard for radio equipment and services. EN 300 220: Short Range Devices (SRD); Radio equipment to be used in the 25 MHz to 1 000 MHz frequency range with power levels ranging up to 500 mW; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive EN 55022 Class A: Limits and methods of measurement of radio disturbance characteristics of information technology equipment. EN 55024: Information Technology Equipment – Immunity characteristics – Limits and methods of measurement. Radio Specifications: ETS 300 300-328 Wideband 2.4GHz Systems
R
Note: Member states in EU wi th restrictive us e for this dev ice ar e c ross ed ou t ! This device is also authorized for us e in all E FTA me mber st ates (C H, ICE, LI, NOR). Reference Standards
EU Declaration of Conformity
See Conformi ty Declaration documentation for detai ls.
RFID Regulatory Compliance Information (if installed)
This sec ti on de tails the r egu latory complianc e information specific to the RFID components in your printer. It may not 7
R
D
apply to other RF devices in the printer. Refer to the documentation provided wi th thos e other RF devices for regulatory information. Av ery Dennison RF produc ts are designed to be compliant with the rules and regulati ons in the locations into which they are sold and wi ll be labeled as requi red. Th e m aj ority o f Av ery D ennis on R F devi ces ar e type approv ed and do not require the user to obtain a licens e or authorization before using the equipment. Check your local regulations for more spec ific information. Any changes or modi ficati ons to Avery Dennison equi pment not expressly approved by Av ery Dennison coul d void the us er authority to operate the equi pment. Changes or modificati ons not expressl y a pproved by t he pa rty r esponsibl e f or c ompli ance could void the us er's authority to operate the equipment. FCC RF Exposure Guidelines
T AF
To comply wi th FCC exposure requirements, antennas that are mounted externally at remote locati ons or operating near users at stand-alone desktop of similar configurations must operate wi th a mi ni mum separati on di stanc e of 20 cm from all persons . Declaration of Conformity for RF Exposure
The ra di o m odule has be en evaluated u nder F CC Bull etin OET 65C and found compliant to the requirements as set forth in CFR 47 Sections 2.1091, 2.1093, and 15.247 (b) (4) addressing RF Exposure from radi o frequency devices. Radio Frequency Interference Requirements
This device complies wi th part 15 of the FCC Rules. Operation is subj ec t to the following two conditions : (1) This device may not cause harmful interference, and (2) this dev ice mus t acc ept any in terferenc e rec eiv ed, inc ludi ng interferenc e that may cause undesired operation. Caution: The Part 15 radi o device operates on a noninterferenc e basis with other devices operating at this frequency when using the listed antenna. 8
D
If the equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Re-orient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that which the receiver is connected.
Collocation Statement:
This device must not be collocated with any other antenna or transmitters .
R
Radio Frequency Interference Requirements - Canada
T AF
This device complies wi th RSS 210 of Industry Canada. Operation is subj ec t to the following two conditions : (1) this device may not cause harmful interference and (2) this dev ice mus t acc ept any in terferenc e rec eiv ed, inc ludi ng interferenc e that may cause undesired operation. This Cl ass A digital apparatus meets the requi rements of the Canadian Interferenc e-Causing Equipment Regul ations . Cet appareil nu méri que d e la Cl ass e A esp ec te to utes les exigencies du Reglement sur le Materi él Brouilleur du Canada. CE Marking & European Union Compliance
Produc ts intended for sale wi thin the European Union are mark ed wi th the CE Mark wh ic h i ndicates co mplianc e to applicable Di rectives and European Normes (EN), as follows. Amendments to thes e Di rectives or Ens are included: Normes (EN), as f oll ows .
9
IMPORTANT NOTICE: This RFID Printer is authoriz ed for us e in all EU and EFTA member states . Pl ease refer to the users manuals for further details. Reference Standards EN 60950: Safety of information technology equipment EN 301 489: Elec troMagnetic Compatibility (E MC) standard for radi o equipment and services EN 300 220: Short Range Devices (SRD) ; Radio equipment to be used in the 25 MHz to 1 000 MHz frequency range with power levels ranging up to 500 mW ; Part 2 : Harmonized EN coveri ng essential requirements under article 3.2 of the R&TTE Di rective EN 55022: Limits and methods of measurement of radio disturbanc e charac teristics of information technology equipment. EN 55024 : Information technology equi pment – Immuni ty c harac teri stics – Limi ts and m ethods of meas urement ERC Recommendati on 70-03 Annex 11 RFID
T AF
R
D
Note: Operating frequency range: 869.525 MHz +27dBm or
