Owner's
Manual ®
6.75 HORSEPOWER 2450 PSi 2.0 GPM Model
No. 580.752310
o o o o °
CAUTION: Before using this product, read this manual and follow al Safety Rules and Operating instructions. SEARS, VBsit
ROEBUCK
OUt Craftsman
and CO.,
website:
Hoffman
Safety Assembly Operation Maintenance Parts
o Espat_ol Estates,
IL 60179
U.S.A.
www.sears.comlcraftsman 0
Part No. 194646GS
Draft 4 (09/28/2004)
8
WARRANTY
....................................
SAFETY RULES
...............................
KNOW YOUR PRESSURE WASHER ASSEMBLY OPERAT!ON
2 2-4 ................
5
...................................
6-8
.................................
9-11
SPECIFICATIONS MAINTENANCE
...............................
12
..............................
LR_TED
13-16
WARRANTY
STORAGE
..................................
TROUBLESHOOTING REPLACEMENT NOTES
17-18
............................
19
PARTS .......................
20-24
.......................................
25
EM!SS!ON CONTROL WARRANTY
..............
26-27
ESPANOL ...................................
28-47
HOW TO ORDER PARTS ................
ON CRAFTSMAN
PRESSURE
BACK PAGE
WASHER
For one year from the date of purchase, when this Craftsman pressure washer is maintained and operated according to the instructions in the owner's manual, Sears will repair, free of charge, any defect in material and workmanship. if this washer is used for commercial purposes, this warranty applies for only 90 days from the date of purchase. If this pressure washer is used for rental purposes, this warranty applies for only 30 days after date of purchase. This warranty does not cover: • Expendable items such as spark plugs or air filters, which become worn during normal use. •
Repairs necessary because of operator abuse or negligence, including damage resulting from no water being supplied to pump or failure to maintain the equipment according to the instructions contained in the owner's manual.
Warranty service is available by returning the pressure washer to the nearest Sears service center or dealer in the United States. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state.
Sears,
Roebuck
and Co., Dept. 817WA,
Hoffman
Estates,
IL 60179
This is the safety alert symbol, it is used to alert you to potential personam injury hazards. Obey all safety messages that follow this symbol to avoid possibme injury or death. i[__[_]ij familiar Read thiswith manual become your carefully pressure and washer. Know its applications, its limitations, and any hazards involved.
Hazard
Symbols
Toxic
The safety alert symbol (,A) is used with a signal
and Meanings
Electrical
Fumes
Shock
word (DANGER, CAUTION, WARNING), a pictorial and/or a safety message to alert you to hazards. DANGER indicates a hazard which, if not avoided, wifl result in death or serious injury. WARNING indicates a hazard which, if not avoided, cou/d result in death or serious injury. CAUTION indicates a hazard which, if not avoided, might result in minor or moderate injury. CAUTION, when used without the alert symbol, indicates a situation that could result in equipment damage. Follow safety messages to avoid or reduce the risk of injury or death.
Slippery
Surface
Fire
Moving
Fal!
Exp!osion
Parts
Flying
Objects
Fluid Injection
Hot Surface
Kickback
WARNING
WARNtNG The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
, DANGER WHEN
ADDING
OR DRAINBNG
Turn
pressure
washer
minutes
before
relieve
pressure
FUEL
OFF and let it cool at least
removing
fuel cap. Loosen
2
cap slowly
to
in tank.
Fil! or drain fuel tank outdoors. DO NOT
overfill
tank. Allow
space
Keep fue! away from sparks, heat, and other Operate
pressure
washer
ONLY
outdoors.
DO NOT
Keep exhaust gas from entering a confined windows, doors, ventilation intakes or other DO NOT operate enclosure, Use a respirator that vapors
pressure or mask
area through openings.
washer
inside
any building
whenever
there
is a chance
or
mask will provide harmful vapors.
packed
with mask so you are certain
necessary
protection
against
Ensure
spark
plug, muffler,
crank engine
If fuel spills, wait engine. OPERATmNG
DO NOT WHEN
spray flammable
spark
nozzle
between
8 to 24 inches
cleaning
surface.
Operate
this unit on a stable
Cleaning
area should
drainage surfaces.
to reduce
Be extremely from a ladder, location. Firmly
grasp
pressure
careful
spray
liquids,
injury
slopes
both hands
relatively
OR EQUBPMENT
FUEL
mN
stoves, water heaters, clothes that have pilot light or other they can ignite fue! vapors.
when
if gun kicks
unstable
using
high
back.
NEVER DO NOT NEVER
aim spray gun at people, allow repair
Squeeze pressure,
resistance
is
If engine starts and fails to continue to run or if increased resistance is felt during starting pull attempts, squeeze
high pressure
system
animals
to operate hose.
hose connected
or plants.
pressure
Replace to pump
washer.
it. and spray
is pressurized.
trigger on spray gun to relieve trapped every time you stop engine. Engage trigger
lock on spray When starting engine, pull cord slowly until felt and then pull rapidly to avoid kickback.
CHILDREN
high pressure
gun while
gun.
because
WITH
washer
Keep
on spray
EQUIPMENT or with fuel shutoff
and
WARNING
trigger
EMPTY
of falls due to slippery
or any other
gun with
spray to avoid
source
causes
WARNING
if you must use pressure
scaffolding
ignition
from
starting
plug wire.
FUEL
surface.
have adequate
possibility
away
before
at angle which
with fuel tank
STORING
plug removed.
OR REPAIRBNG
Store away from furnaces, dryers or other appliances spray
are
EQUIPMENT
TRANSPORTING
Disconnect WHEN TANK
with spark
or equipment
Transport/repair valve OFF.
Keep
fuel cap and air cleaner
until it evaporates
* Do not tip engine fuel to spill.
WARNING
or smoke.
EQUIPMENT
in place.
VHEN
inhaling
pilot lights,
sources.
light a cigarette
STARTING
DO NOT
may be inhaled.
Read all instructions
VHEN
ignition
for fuel expansion.
open flames,
gun.
WARNING
Keep water electric
spray
shock
away from
WARNING
electric
wiring
or fatal
may result.
Always
wear eye protection
in vicinity
WARNING
of equipment
when
using equipment
or when
in use.
CAUTION
DO NOT tamper DO NOT DO NOT Allow
touch
pressure
to cool
washer
before
must be at least walls
secure
Keep at least 3 feet of clearance on all sides of pressure washer for adequate cooling, maintenance and servicing,
leave
In the State of California
NEVER use a spray lock or trigger guard
Other states
a spark arrester
may have similar
lands.
Public laws.
is required
Resources Federal
by law
Code).
laws apply
on
If you equip the muffler with a spark arrester,
it must be maintained
pressure.
other DO NOT
federal
rated
5 feet from
and/or
DO NOT
4442 of the California
above
touching.
structures having combustible combustible materials.
(Section
speed.
washer
CAUTION
hot surfaces.
equipment
The pressure
with governed
operate
in effective
working
spray spray
gun in open position. gun unattended
while
machine
is
running.
Always
be certain
are correctly
gun which does not have a trigger in place and in working order.
spray
gun,
nozzles
and accessories
attached.
order.
CAUTION
WARNING DO NOT point spray NEVER • DO NOT wear loose clothing, jewelry or anything may be caught in starter or other rotating parts. • Tie up long hair and
remove
jewelry.
WHEN ADJUSTING OR MAKmNG PRESSURE WASHER
If you have questions contact Sears.
WHEN
TESTING
Use approved DO NOT
REPAIRS
the spark plug wire from
the wire where
check
FOR spark
it cannot
contact
ENGINE
SPARK
TO YOUR
the spark
plug and
spark plug.
NEVER
operate
without
protective
with spark
plug removed.
about
intended
units with broken housing
by-pass
use, ask dealer
or missing
parts,
or
or
or covers.
any safety
device
on this machine.
Before starting pressure washer in cold weather, check all parts of the equipment to be sure ice has not formed there. NEVER
move machine
Use handle Check
plug tester.
for spark
mode.
CAUTION
DO NOT
place
in jet spray
aim spray gun at plants.
that
WARNING
Disconnect
gun at glass when
provided
fuel system
by pulling
on high pressure
hose.
on unit. for leaks or signs
of deterioration,
such as chafed or spongy hose, loose or missing clamps, or damaged tank or cap, Correct all defects before
operating
This equipment authorized
pressure
washer.
is designed
parts ONLY.
to be used with Sears
If equipment
that DO NOT comply with minimum assumes al! risks and liabilities.
is used with parts specifications,
user
KNOW YOUR PRESSURE
WASHER
Read the owner's manual and safety rules before operating your pressure washer. Compare the illustrations with your pressure washer to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference.
Model Data Decal Spray Recoil
Gun
Starter High Pressure
Nozzle Extension Fuel Cap
Adjustable
Oil Fill Cap and Dipstick
Water
Nozzle
Throttle
Control
Lever
Hose
Inlet
_. High
.___
Pressure
Outlet
Air Filter
Detergent Pick-Up Tube and Filter Pump
Adjustable Nozzle - Adjust for high or low pressure; narrow or fan spray.
Nozzle Extension convenient use.
Air FHter - Dry type filter element limits the amount of dirt and dust that gets in the engine.
Oil FHI Cap and Dipstick - Check and fill engine with oil here. See page 7 for oil recommendations and filling instructions.
Choke Lever - Used to help start a cold engine. Detergent Pick-Up Tube and FHter = Used to siphon detergent from chemical bottle to the low pressure water stream.
= Attached to spray gun for more
Pump - Develops high water pressure. Recoil Starter - Used for starting the engine.
Fue_ Cap = Fill fuel tank with regular unleaded gasoline here.
Spray Gun - Controls the application of water onto cleaning surface with trigger device. Includes trigger lock.
High Pressure Hose - Connect one end to the spray gun and other end to the high pressure outlet.
Throttle Control Lever = Sets engine in starting mode for recoil starter and stops running engine.
High Pressure Outlet = Connection for high pressure hose.
Water inlet = Connection for garden hose.
Model Data Decal - Provides model and serial number of pressure washer. Please have these readily available when calling for assistance.
Yourpressurewasherrequiressomeassemblyandis Attach Handle readyfor useonlyafterit hasbeenproperlyserviced 1. Place handle assembly onto handle supports withthe recommended oil andfuel. connected to main unit. Make sure holes in handle If you haveany problemswith the assemblyof align with holes on handle supports. your pressurewasher,pleasecall the pressure washerhelplineat 1=800=222=3136. Handle IMPORTANT: Anyattemptto runtheenginebeforeit hasbeenservicedwiththerecommended oilwillresult in an engine failure.
REMOVE PRESSURE FROM CARTON 1.
Open carton and slice two corners opposite guide handle from top to bottom so panel can be folded down flat.
2.
Remove fillers, accessories and parts bag shipped with your pressure washer.
3.
Roll pressure washer out open end of carton.
4.
Check carton for additional loose parts.
CARTON