National Guard Products Inc

Cut astragal to fit. 2. Position on door face with astragal overlapping gap and other door a minimum of 3/4” (required by U.L. on fire-rated doors). 3. Mark screw ...
30KB Größe 3 Downloads 2 vistas
National Guard Products Inc. 1-800647-7874

139SP/1392SP Astragal

2" 1/8"

1/8"

1 7/16"

door

15/16"

jamb

Installation Instructions 1. Cut astragal to fit. 2. Position on door face with astragal overlapping gap and other door a minimum of 3/4” (required by U.L. on fire-rated doors). 3. Mark screw holes. 4. Drill pilot holes for screws using a 11/64” drill bit (139SP) or 5/16: bit for SNB’s (1392SP).. 5. Install with #12x1-1/4” SMS or SNB (1392SP). 6. Adjust position so astragal does not impede proper closing and latching of door. UL-10C Positive Pressure Tested Gasketing Material for Fire Doors. Also Classified in accordance with UBC 7-2 (1997).

28 H7

LA

S S IFIE

28H7

UL10-B Gasketing Materials for Fire Doors.

D

C

28 H7

Intended for Application to Classified Steel fire doors rated up to 3 hours and Wood type fire doors up to1 1/2 hours.

Instalación Instrucciones 1. Corte el astrágalo al tamaño requerido para que encaje. 2. Coloque en la puerta y marque los agujeros para los tornillos. 3. Taladre los agujeros de guía para los tornillos usando una broca de 11/64". (139SP) 5/16” (1392SP). 4. Instale con los #12x1-1/4” SMS (130SP); (1392SP) SNB tornillos suministrados. Ajuste la posición de modo que el astrágalo no impida cerrar y correr el pestillo debidamente a las puertas.