Installation guide AELEMENT ANSI Lock Eng E F
AE i 0 xxx... series (NO electronic privacy )
Installation guide Guía de instalación Guide d'installation
1" (25.5)
1-25/32" (45)
2-9/16" (65) 4-9/16" (116)
2-5/8" (67)
19/32" (15)
*****
OUTSIDE
INSIDE
EXTERIOR EXTERIEUR
*
INTERIOR INTERIEUR
* Only for doors > 2-9/16" thickness *Solo para puertas > 65mm de espesor *Uniquement pour portes > 65 mm d' épaisseur
5 6
9
7
8
10
Only SALTO spindle Solo cuadradillos SALTO Seulement carrés SALTO The mounting with other spindles voids the guaranty. El montaje de otros cuadradillos anula la garantia. Le montage d'autres carrés annulera le garantie.
11
Ou Ex tside ter ior
t*
4
In Int side eri or
3
1 2
(mm)
NOTE: Screws and spindles are included in the box of the reader. NOTA:Los tornillos y cuadradillos estan incluidos en la caja del lector. NOTE: Les vis et les carrés sont inclus dans la boite du lecteur.
220511-ED. 27/09/2012 Installation guide AELEMENT ANSI LOCK
Recommendation for Customer’s lever set installation on SALTO AElement. See : 4MO01300 Recomendaciones para la instalación de manillas Cliente en SALTO AElement. Ver: 4MO01300 Recommandation pour l’installation des béquilles client sur Salto AElement. Voir: 4MO01300
© 2011 SALTO Syst ems S.L.
1/4
All contents current at time of publication. SALTO Systems S.L. reserves the right to change availability of any item in this catalog, its design, construction, and/or materials.
Installation guide AELEMENT ANSI Lock ) 9 LY 1 ( " ON 3/4 IDE O S IN
C
L
L
O3/8 (O10 " )
"
O1 25) (O
INSIDE
1-1/16" MIN (27)
3-1/2" (89) 4,875" (124)
L
OF STRIKE
C
1-1/8" (28.6)
L
C C OF L LOCK
OF LEVER
OF LOCK
C
1.625" (41) 2" (50.8)
2.395" (60.85)
1.61" (40.9)
O3 (O1 /8" 0) 1.671" (42.45)
5.616" (142.65)
8" (203.2) 6-9/16" (166.7)
1,25" (32)
0,219" (5,5)
INSIDE
OUTSIDE
4-3/4" 120,65 (120.65)
1.125" (28.5)
1,25" - 1.125" (32) -(28.6)
2-7/16" (61.9)
2
1
Cut Strike, Lock Case
Mecanizado cerradero, caja cerradura
3
1-7/16" (36.5)
1/4" (6.35) OUTSIDE
4
" /16 O9 14) (O 16" O9/ 14) (O
2-3/4" (70)
8-5/16" (211.1) 2" (50.8)
INSIDE
ø9/16"( ø14) HOLE ONLY INSIDE ø9/16 (ø14)AGUJERO SOLO POR EL INTERIOR
C
C
L
L
OF LOCK
OF LOCK
C
L
OF LEVER
C
L
OF LOCK
OUTSIDE
EXTERIOR EXTERIEUR
TEMPLATE
INSIDE
PLANTILLA
INTERIOR INTERIEUR
Eng NOTE FOR D RILLING MA RKS USE TEMPLATE ONLY BY INSIDE E
NOTA , PARA MARCAR LOS AGUJEROS USAR LA PLANTILLA SOLO POR EL INTERIOR
F POUR MARQUER LES JOINTS DE PERÇAGE,
N'UTILISER LE GABARIT QUE DU CÔTÉ INTERIEUR.
5
The groove must be on the same side than the grub screw. La ranura en el lado del prisionero. La rainure doit être du côté de la vis
6 Metal door Wood door Puerta metalica Puerta madera Porte metallique Porte en bois
Only SALTO spindle
Solo cuadradillos SALTO Seulement carrés SALTO
CUT * CORTE
INSIDE
INTERIOR INTERIEUR 220511-ED. 27/09/2012 Installation guide AELEMENT ANSI LOCK
*
© 2011 SALTO Syst ems S.L.
2/4
All contents current at time of publication. SALTO Systems S.L. reserves the right to change availability of any item in this catalog, its design, construction, and/or materials.
Installation guide AELEMENT ANSI Lock 8
7
REMOVE QUITAR RETIRER
INSIDE
OUTSIDE
INTERIOR INTERIEUR
=
10
9
INSIDE
EXTERIOR EXTERIEUR
INTERIOR INTERIEUR
2
= 1 Aligned OUTSIDE & INSIDE
Screw driver PZ2
12
11
Alinear EXTERIOR - INTERIOR
READER CABLE CABLE LECTOR
Only LR03 Batteries WIRELESS CABLE (OPTIONAL)
Fasten with screw to keep it aligned Fijar el tornillo para mantener el alineamiento Fixer la vis pour assurer l'alignement .
AT THIS PO INT DO NOT CLOSE THE DOO R PROGRAM THE L OCK FIRST
E
NO CIERRE L A PUERTA. PROGRAMAR ANTES LA CERRADURA
D
TÜRE NICHT S CHLIESSEN. ZUERST SCHLOSS PROGRAMMIEREN
F
NE PAS FERMEZ LA P ORTE DE PROGRAMMER L A SERRURE
I
LOCK CABLE
a
PRIMA DI CHIUDERE LA P ORTA, PROGRAMMARE LA SERRATURA
follow user manual
CABLE CERRADURA
13
Eng
14
b
Screw driver Torx T10 TAMPER
220511-ED. 27/09/2012 Installation guide AELEMENT ANSI LOCK
© 2011 SALTO Syst ems S.L.
3/4
All contents current at time of publication. SALTO Systems S.L. reserves the right to change availability of any item in this catalog, its design, construction, and/or materials.
Installation guide AELEMENT ANSI Lock E F
AE i 1 xxx... series (With electronic privacy )
Installation guide Guía de instalación Guide d'installation
1" (25.5)
1-25/32" (45)
2-9/16" (65)
2-5/8" (67)
19/32" (15)
4-9/16" (116)
Eng
*****
*
* Only for doors > 2-9/16" thickness *Solo para puertas > 65mm de espesor *Uniquement pour portes > 65 mm d' épaisseur
OUTSIDE
5
6
INSIDE
EXTERIOR EXTERIEUR
9
7
INTERIOR INTERIEUR
8 12
PRIVACY CABLE
CABLE PRIVACIDAD
4
3
Only SALTO spindle Solo cuadradillos SALTO Seulement carrés SALTO
2
1
The mounting with other spindles voids the guaranty. El montaje de otros cuadradillos anula la garantia. Le montage d'autres carrés annulera le garantie.
Eng Declaration of conformity By means of the present Salto Systems S.L. (Pol. Lanbarren C/Arkotz, 9 20180 Oiartzun - Spain - CIF B20708517), declares that this equipment fulfills the essential requirements and any other applicable or indispensable dispositions of the Directive 1999/5/CE or the Directive 89/336/EEC. You will be able to find a copy of the original declaration of conformity at the following Internet address: http://www.saltosystems.com
D
Declaración de conformidad Por medio de la presente Salto Systems S.L. (Pol. Lanbarren C/Arkotz, 9 - 20180 Oiartzun – Spain - CIF B20708517), declara que este equipo cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE o la Directiva 89/336/EEC. Podrá encontrar una copia de la declaración de conformidad original en la siguiente dirección de Internet: http://www.saltosystems.com
Konformitätserklärung Hiermit erklärt Salto Systems S.L. (Pol. Lanbarren C/Arkotz, 9 – 20180 Oiartzun – Spanien – UID-Nr. B20708517), dass sich dieses Produkt in Übereinstimmung mit den grundlegenden Anforderungen und den relevanten Vorschriften der Richtline 1999/5/EG bzw. 89/336/EWG befindet. Die Kopie der Konformitätserklärung im Originalwortlaut ist auf folgender Website zu finden: http: http://www.saltosystems.com Alle Proximity-Modelle sind “Receiver class 3”.
I
All proximity models are "Receiver class 3".
E
NOTE: Screws and spindles are included in the box of the reader. NOTA:Los tornillos y cuadradillos estan incluidos en la caja del lector. NOTE: Les vis et les carrés sont inclus dans la boite du lecteur.
Dichiarazione di conformità Con la presente Salto Systems S.L (Pol.Lanbarren C/Arkotz, 9 – 20180 Oiartzun – Spain – CIF B20708517), dichiara che questa apparecchiatura è conforme ai requisiti essenziali ed a qualsiasi disposizione applicabile o esigibile in riferimento alla direttiva 1999/5/CE e della direttiva 89/336/EEC. È possibile trovare una copia originale della dichiarazione di conformità al seguente indirizzo internet http:/www.saltosystems.com Tutti i modelli di prossimità sono “Receiver Class 3”
Todos los modelos de proximidad son “Receiver class 3”.
F
Déclaration de conformité Par le biais de celle-ci, Salto Systems S.L. (Pol. Lanbarren C/Arkotz, 9 - 20180 Oiartzun – Spain - CIF B20708517), déclare être conforme aux normes essentielles et n’importe quelles autres dispositions applicable et exigibles des Directives 1999/5/CE ou 89/336/EEC. Vous pourrez trouver une copie de la déclaration de conformité originale sur le site internet suivant: http://www.saltosystems.com Tous les modèles de proximité sont “Receiver class 3”.
220511-ED. 27/09/2012 Installation guide AELEMENT ANSI LOCK
ONLY FOR PROXIMITY MODELS This device complies with Part 15 of the FCC Rules and with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
© 2011 SALTO Syst ems S.L.
www.saltosystems.com
4/4
All contents current at time of publication. SALTO Systems S.L. reserves the right to change availability of any item in this catalog, its design, construction, and/or materials.
FCC Compliance Statements (FCCID: UKCAE9, UKCAE9W, UKCL90, UKCG90, UKCRPOE, UKCNRF, UKCR485, UKCA9XX, UKCA9XW) This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help.
Canadian Compliance Statement (IC: 10088A-AE9, 10088A-AE9W, 10088A-L90, 10088A-G90, 10088A-RPOE, 10088A-NRF, 10088A-R485, 10088A-A9XX, 10088A-A9XW) This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
EU Compliance Statement EN
Hereby, Salto Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 – 20180 Oiartzun– Spain), declares that this access control equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC (R&TEE). You will be able to find a copy of the original declaration of conformity at the following Internet address: http://www.saltosystems.com/declarations
ES
Por medio de la presente Salto Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 – 20180 Oiartzun– Spain) declara que este equipo de control de accesos cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE (R&TEE). Podrá encontrar una copia de la declaración de conformidad original en la siguiente dirección de internet: http://www.saltosystems.com/declarations
FR
Par la présente Salto Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 – 20180 Oiartzun– Spain) déclare que l'appareil access control equipment est conforme aux exigences essentielles et aux autres dispositions pertinentes de la Directive 1999/5/CE (R&TEE). You will be able to find a copy of the original declaration of conformity at the following Internet address: http://www.saltosystems.com/declarations
DE
Hiermit erklärt Salto Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 – 20180 Oiartzun– Spain), dass sich das Gerät access control equipment in Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG (R&TEE). You will be able to find a copy of the original declaration of conformity at the following Internet address: http://www.saltosystems.com/declarations
DU
Hierbij verklaart Salto Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 – 20180 Oiartzun– Spain)dat het toestel access control equipment in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG (R&TEE). You will be able to find a copy of the original declaration of conformity at the following Internet address: http://www.saltosystems.com/declarations
Mechanical Warnings In order to assure a good performance for the device, Salto recommends to use a certified mortise lock and make sure that it is in good condition. Do not knock the device while mounting, if necessary, loose the trims fixation. Do not bring the device into contact with oil, paints or acids. Do not paint the door with the mortise lock fixed to the door. CLEANING THE ELECTRONIC FURNITURE: You can use a damp cloth from soapy water. Never use abrassive soaps or sprays.It is important to clean stainless steel regularly.
Legal Warnings SALTO shall not be liable for any losses, personal damages or claims arising out of, or in connection with t he wrong fitting of the cylinders o r bad programming that can cause blocking of entries and exits i.e. blocking entrance, exit of Injured or people in danger. Do you have the programming keys or management software (not included in this box)? If not, then take note that when the door is closed without having been programmed it will automatically lock, and can only be opened with a Portable Programing Device. If in any doubt, please contact your supplier or visit our Web site: www.saltosystems.com According to the fourth point on the SALTO SYSTEMS LIMITED WARRANTY document, the warranty does not cover product failures due to repair installations, modifications or improper service performed by non-Salto authorised persons. The user is not allowed to disassemble the inner electromechanic structure in the SALTO furniture. (for instance, loosening the torx screws) In the case of a user intended intervention at the inner parts, the user will lose any warranty right from SALTO.
N20371
Copyright © 2013 SALTO Systems
ED0 - 221405
