Huawei Phone p7 Back Cover Replacement

Huawei Phone p7 Back Cover Replacement Escrito por: Sophia

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 1 de 4

Huawei Phone p7 Back Cover Replacement

HERRAMIENTAS:

PARTES:

Heat Gun (1)

Huawei Ascend P7 back cover (1)

iFixit Opening Picks set of 6 (1) Suction Handle (1)

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 2 de 4

Huawei Phone p7 Back Cover Replacement

Paso 1 — Back Cover 

Heat to melt the adhesive sticker under the back cover.



Place the suction cup and pull to open a gap between the back cover and the body.And then insert into the guitar pick and slide to cut the sticker.



Attention: Be careful with the bottom side because there is the battery flex cable.

Paso 2

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 3 de 4

Huawei Phone p7 Back Cover Replacement

Paso 3 

Remove the back cover.



And you can replace with the new back cover.

Paso 4

To reassemble your device, follow these instructions in reverse order. La versión más reciente de este documento fue generada en 2017-09-04 08:19:17 AM .

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 4 de 4