Inductive sensor
NMB5-18GM65-E0-FE-V1
42 50 55
4
M18x1
2.5
Dimensions
65
Model Number 24
NMB5-18GM65-E0-FE-V1
Features Stainless steel sensing face Sensing range 5 mm 3-wire DC Ferrous targets
LEDs
6
• • • •
M12x1
Connection 1
L+
4 3
L-
Technical Data Pinout
1 4
2
Release date: 2012-12-13 14:38
Date of issue: 2012-12-13 908437_eng.xml
3
Wire colors in accordance with EN 60947-5-2 1 2 3 4
BN WH BU BK
(brown) (white) (blue) (black)
Accessories V1-G-OR2M-POC Female cordset, M12, 4-pin, TPE cable, welding-bead resistant
V1-W-2M-PUR Cable socket, M12, 4-pin, PUR cable
V1-G-2M-PUR Cable socket, M12, 4-pin, PUR cable
AB-18 Mounting aid
Subject to modifications without notice Pepperl+Fuchs Group USA: +1 330 486 0001 www.pepperl-fuchs.com
[email protected]
General specifications Switching element function Rated operating distance Installation Output polarity Assured operating distance Actuating element Reduction factor rAl Reduction factor rCu Reduction factor r304 Reduction factor rSt37 Nominal ratings Operating voltage Switching frequency Hysteresis Reverse polarity protection Short-circuit protection Voltage drop Operating current Current consumption Off-state current Indicators/operating means Operating display
sn sa
UB f H
Ud IL Ir
Ambient conditions Ambient temperature Mechanical specifications Connection type Housing material Sensing face Protection degree
NPN NO 5 mm flush DC 0 ... 4.05 mm Ferrous targets 0 0 0.6 - 0.8 1 10 ... 30 V DC 15 Hz 3 ... 15 typ. 5 % yes yes ≤2V ≤ 200 mA < 14 mA ≤ 10 µA 4-way dual LED Green: power Yellow: output -40 ... 70 °C (-40 ... 158 °F) V1 connector (M12 x 1), 4-pin Stainless steel 1.4305 / AISI 303 Stainless steel 1.4305 / AISI 303 IP67 / IP68 / IP69K - cordset dependent according to cable specification
Compliance with standards and directives Standard conformity Standards
EN 60947-5-2:2007 IEC 60947-5-2:2007
Approvals and certificates UL approval CSA approval CCC approval
Germany: +49 621 776-4411
[email protected]
cULus Listed, General Purpose cCSAus Listed, General Purpose Products with a maximum operating voltage of ≤36 V do not bear a CCC marking because they do not require approval. Copyright Pepperl+Fuchs Singapore: +65 6779 9091
[email protected]
1