if Lynbrook. NY 11563-0329. Outside the USA. the local Amprobe representative will assist you. Above limited war-. ~ ranty covers repair and replacement of instrument only and no other obligation is stated or ... After measuring insulation resistance, be sure to discharge any high voltage charge. 6. Never apply an input ...
auto power off 30 sec (Data store). 0Ë ... 50Ë C / 32Ë ...122Ë F. -20Ë ... 70Ë C / -4Ë ...158Ë F ... Mississauga, ON L4Z 1X9. Tel.: 877-AMPROBE (877-267-7623). Tel.
If there is no indication, voltage could still be ... Caution: If three phase equipment is being checked and one phase is open, the voltage is ..... Alta tensione.
156 (H) x 86 (L) x 38 (P) mm (6,1 x 3,4 x 1,5 po). Poids : ...... Reparationer i USA och Kanada som ej täcks av garanti ska skickas till ett Amprobe® Test Tools.
If the Tester is used in a manner not specified by the manufacturer, protection ... Use proper protective equipment as required by local or national authorities.
1. Press the POWER ON/OFF button once to turn on the instrument. 2. Selecting desired Measurement Mode a) After the instrument has been turned on, press.
Buy” section on www.amprobe.com for a list of distributors near you. ...... del conducto entre 0,001 y 9999 pies cuadrados o 928 m2; seguidamente, pulse la ...
ambiant (p. ex. passage d'une température haute à basse), il lui faut 30 secondes de réaction au capteur de CO2 et 30 minutes pour l'humidité relative. 3.
battery, strike the back of the Probe sharply in the palm of your hand. The replacement battery can then be inserted. Use a 9 volt alkaline battery only. DO NOT ...
or -50°C to 1550°C. The IR-750 / IR-750-EUR is perfect for demanding quality and process control applications with extremely high ..... Possible dead battery.
Since some states or countries do not allow the exclusion or limitation of an ... by the following: your name, company's name, address, telephone number, and proof of ... charge. please check the “where to buy” section on www.amprobe.com for a list o
oR STAUToRY - inCLUDinG iMpLieD wARRAnTieS of fiTneSS foR A .... Any time you turn the unit off and turn it back on, it will go through the warm-up process.
