Installation Guide Window Air Conditioner

THANK YOU FOR YOUR PURCHASE !

QUICK SETUP GUIDE 1

Secure the top mounting rail to the top of the enclosure with four short screws.

2

Top Mounting Rail

Insert the “Left” and “Right” filler panels into the top and bottom rails of the air conditioner. Top Mounting Rail

Filler panel

4a

Fasten the top mounting rail with long screws into the window sill. Fasten the “Left” and “Right”filler panel with long screws through the upper hole into the sill.

3

Bottom Rail

Filler panel

Set the AC in the window to the center. Place the unit so that the edge of the bottom track is opposite the trailing edge of the window sill. Fasten the support bracket with screws.

Sash Seal

Top Mounting Rail Window Frame

Sash Lock

1/4”

Filler panel

Support bracket Window sill

Lock frame Window sill

4b

Set the lock frame between the bottom of the filler panel and the window sill. Fasten the long screw through the lock frame and into the sill as shown.

4C

Set the sash lock between the upper and lower window belts and secure with long screws. Use 2 long screws on each lock.

4d

Bottom Rail

5

Cut the insulation strip to fit the inside of the filler panel and completely cover it. Set the insulation strip on the “Left” and “Right” filler panels and hold for 5 seconds to fasten it. (only for E-star models) Insulation strip

Insert the sash seal between the top of the lower window sash and the glass of the upper window to prevent outside from coming into

Unit appearance may vary but installation guidelines remain the same.

PARTS GUIDE Open the carton and remove the below parts.

1

2

User Manual

1

3

AC Unit

1

4

Filler Panels (with "Left" & "Right" remark)

2

Remote Control

1

6

Sash Lock

1

7

5/16" Long Hex-head Screw

10

8

5/8" Long Hex-head Screw

4

9

1/2" Long Hex-head Screw

2

10

5/8" Long Flat Head Bolt and Locknut

2

11

Sill Ange Bracketl

2

12

Window Sash Seal

1

13

Foam Top Window Gasket (Thin sponge for back-up using)

1

14

Insulation strip (sponge)

2

15

1/2" Long Flat Head Bolt and Locknut

4

16

Gasket

2

17

Support Bracket (with R and Lremark)

2

18

Battery (AAA)

2

AUTO MODE

SLEEP

TMER

ECO

FAN ONLY

Top Rail

DISPLAY

1

FAN SPEED

Quantity

COOL

Part Name

5

Appearance

POWER

NO.

Do not drill holes in the product. Drilling holes in the product can cause the air conditioner to not function properly.

No taladre agujeros en el producto. Perforacion de agujeros en el producto pueden causarque el aire acondicionado no funcione correctamente.

Ne pas percer de trous dans le produit. Percer des trous dans le produit peut empecher le conditionneur d'air de bien fonctionner.

Any questions or concerns about your product? Before returning the product to the store, please contact TCL for specialized support with installation, maintenance, or repair.

Preguntas o preocupaciones por su producto? Antes de devolverel producto a la tienda, favor de comunicarse con TCL para soporte especializado en instalacion, mantenimiento o reparacion.

Des questions ou des préoccupations concernant votre produit? Avant de renvoyer le produit au magasin, veuillez contacter TCL pour une assistance spécialisée avec installation, maintenance ou réparation.

Contact us 1-800-825-6747 or visit www.tclusa.com

www.tclusa.com