Documento no encontrado! Por favor, inténtelo de nuevo

Samsung Alias 2 Hinge Replacement

First you take the front apart and then you take the back apart in order to get to ... Jiggle it a little if it doesn't come apart. ... Make sure you don't mix the screws.
NAN Größe 0 Downloads 0 vistas
Samsung Alias 2 Hinge Replacement

ID de guía: 5414 - Borrador: 2018-04-27

Samsung Alias 2 Hinge Replacement This is a guide to replacing the hinge of a Samsung Alias 2 cellular phone.

Escrito por: Chris

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 1 de 13

Samsung Alias 2 Hinge Replacement

ID de guía: 5414 - Borrador: 2018-04-27

INTRODUCCIÓN First you take the front apart and then you take the back apart in order to get to the hinge.

HERRAMIENTAS: Phillips #00 Screwdriver (1) iFixit Opening Tools (1) Tweezers (1)

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 2 de 13

Samsung Alias 2 Hinge Replacement

ID de guía: 5414 - Borrador: 2018-04-27

Paso 1 — Battery 

push down the back cover of the phone, then take it out.



Remove the battery.

Paso 2

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 3 de 13

Samsung Alias 2 Hinge Replacement

ID de guía: 5414 - Borrador: 2018-04-27

Paso 3 — Hinge 

Remove the two 4 mm screws on screen.

Paso 4



Remove front outside casing with plastic opening tools.

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 4 de 13

Samsung Alias 2 Hinge Replacement

ID de guía: 5414 - Borrador: 2018-04-27

Paso 5 

Remove ribbon connector next to camera using tweezers.



Unscrew and remove the two 3.95 mm screws underneath that ribbon connector.

Paso 6

 Be careful not to lose their accompanying plastic washers.

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 5 de 13

Samsung Alias 2 Hinge Replacement

ID de guía: 5414 - Borrador: 2018-04-27

Paso 7



Pull the two halves of the phone apart.



The phone will not slide straight apart. You have to angle the back half up a little.



Do not force it. Jiggle it a little if it doesn't come apart.

Paso 8 

© iFixit — CC BY-NC-SA

es.iFixit.com

Remove the plastic panel cover from the hinge.

Página 6 de 13

Samsung Alias 2 Hinge Replacement

ID de guía: 5414 - Borrador: 2018-04-27

Paso 9



Remove the 3.41 mm screw out from underneath plastic cover.

Paso 10



Pop out top half of hinge with plastic opening tool. This will release hinge cover for removal.

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 7 de 13

Samsung Alias 2 Hinge Replacement

ID de guía: 5414 - Borrador: 2018-04-27

Paso 11



Pull off hinge cover.

Paso 12



Remove the two 2.71 mm screws on the hinge using screwdriver.

 Under these screws will be a washer, spring, and small metal disc. Make sure you don't lose these.

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 8 de 13

Samsung Alias 2 Hinge Replacement

ID de guía: 5414 - Borrador: 2018-04-27

Paso 13 

Remove Verizon logo from back of phone using plastic opening tool

 The logo is attached with glue. It will be sticky but it just pulls off.

Paso 14 

Remove the four 4.44 mm screws from the back.



Remove the three 4.35mm screws from under the Verizon logo.

 Make sure you don't mix the screws together.

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 9 de 13

Samsung Alias 2 Hinge Replacement

ID de guía: 5414 - Borrador: 2018-04-27

Paso 15 

Pull back off using plastic opening tool

 Do Not lose the buttons on the side of the phone, as they will come off of the phone when you remove the back outside casing.

Paso 16 

© iFixit — CC BY-NC-SA

es.iFixit.com

Pull up on yellow tab.

Página 10 de 13

Samsung Alias 2 Hinge Replacement

ID de guía: 5414 - Borrador: 2018-04-27

Paso 17 

Disconnect connecting cord using tweezers.



Disconnect rectangular ribbon.

Paso 18

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 11 de 13

Samsung Alias 2 Hinge Replacement

ID de guía: 5414 - Borrador: 2018-04-27

Paso 19 

Take out the logic board.



Remove the three 3.95 mm screws.

Paso 20

 The two rightmost screws must be pulled out with tweezers after unscrewed.

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 12 de 13

Samsung Alias 2 Hinge Replacement

ID de guía: 5414 - Borrador: 2018-04-27

Paso 21 

Pull the hinge out.

To reassemble your device, follow these instructions in reverse order. La versión más reciente de este documento fue generada en 2019-08-27 06:17:50 PM .

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 13 de 13