Canon EOS Rebel G Back Panel Latch Replacement

Canon EOS Rebel G Back Panel Latch Replacement How to replace faulty back panel latch.

Escrito por: Zach

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 1 de 5

Canon EOS Rebel G Back Panel Latch Replacement

INTRODUCCIÓN This guide teaches how to to install the back panel latch on your camera.

HERRAMIENTAS:

PARTES:

Phillips #00 Screwdriver (1)

Replacement Latch (1)

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 2 de 5

Canon EOS Rebel G Back Panel Latch Replacement

Paso 1 — Front Panel 

Using a #00 Phillips screw driver, remove three 4.4 mm Phillips screws as indicated by the red circles.

Paso 2



Using your finger, peel back the textured grip so the components are separated.

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 3 de 5

Canon EOS Rebel G Back Panel Latch Replacement

Paso 3



Using the flat end of a spudger, loosen the connection between the front panel and the device.



Remove the front panel using your hands.

Paso 4 — Back Panel Latch 

Using a 00 Phillips screw driver, unscrew the two screws located on the side of the camera. 

© iFixit — CC BY-NC-SA

es.iFixit.com

Two 4.3 mm Phillips screws

Página 4 de 5

Canon EOS Rebel G Back Panel Latch Replacement

Paso 5 

Open the back panel by pushing the locking latch up.



Lift the latch cover off of the camera body.



Slide the side latch (for the back door) up and then lift straight away from the camera body.

Paso 6

 Sometimes the latch will detach while pushing it up.

To reassemble your device, follow these instructions in reverse order. La versión más reciente de este documento fue generada en 2017-09-14 11:44:02 PM .

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 5 de 5