Razor A Handle Grips Replacement

Wedge one end of a pair of scissors between the metal T-tube and a handle grip, with the cutting edge toward the handle grip. Cut the handle grip off.
NAN Größe 0 Downloads 0 vistas
Razor A Handle Grips Replacement

ID de guía: 11455 - Borrador: 2014-01-28

Razor A Handle Grips Replacement Remove an existing pair of handle grips and install a replacement.

Escrito por: Jordyn

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 1 de 5

Razor A Handle Grips Replacement

ID de guía: 11455 - Borrador: 2014-01-28

INTRODUCCIÓN Do your hands hurt or slip when riding your scooter? Chances are your handle grips need to be replaced. This guide will show you how.

HERRAMIENTAS:

PARTES:

Container for water (1)

Razor Scooter Handle Grips (1)

Utility Scissors (1)

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 2 de 5

Razor A Handle Grips Replacement

ID de guía: 11455 - Borrador: 2014-01-28

Paso 1 — Handle Grips

 If the scooter does not already have handle grips, skip to step 2. 

Locate the handle grips at the upper ends of the T-tube.

 Be careful to keep the scissors away from your other hand while cutting the handle grips. 

Wedge one end of a pair of scissors between the metal T-tube and a handle grip, with the cutting edge toward the handle grip. Cut the handle grip off.



Repeat for the other handle grip.

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 3 de 5

Razor A Handle Grips Replacement

ID de guía: 11455 - Borrador: 2014-01-28

Paso 2



Soak the replacement handle grips in warm water for 2-3 minutes.

 The longer you soak the handle grips in water, the larger they get. Soaking the handle grips for a long time will not damage them.

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 4 de 5

Razor A Handle Grips Replacement

ID de guía: 11455 - Borrador: 2014-01-28

Paso 3

 Each handle grip should now slide onto the T-tube with ease. If not, soak the handle grip(s) in warm water for another 1-3 minutes. 

Holding the T-tube with one hand, slide a handle grip completely onto the T-tube. 



Repeat for the other handle grip if installing both.

Let the handle grips dry for 24 hours before use.

La versión más reciente de este documento fue generada en 2019-08-24 06:35:37 AM .

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 5 de 5