Documento no encontrado! Por favor, inténtelo de nuevo

iRobot Roomba 551 Side Brush Replacement

Replace the side brush of your Roomba. Escrito por: Aaron Jacobs. iRobot Roomba 551 Side Brush Replacement. © iFixit — CC BY-NC-SA es.iFixit.com.
2MB Größe 3 Downloads 0 vistas
iRobot Roomba 551 Side Brush Replacement

iRobot Roomba 551 Side Brush Replacement Replace the side brush of your Roomba.

Escrito por: Aaron Jacobs

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 1 de 4

iRobot Roomba 551 Side Brush Replacement

INTRODUCCIÓN This guide explains how to quickly remove the side brush from your Roomba in order to either replace it or to further disassemble the device.

HERRAMIENTAS: Phillips #1 Screwdriver (1)

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 2 de 4

iRobot Roomba 551 Side Brush Replacement

Paso 1 — Side Brush 

Place your Roomba upside-down on a hard surface.



While holding the side brush in place, use a Phillips #1 screwdriver to remove the 4.5mm screw from the center of the brush.

Paso 2

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 3 de 4

iRobot Roomba 551 Side Brush Replacement

Paso 3 

Gently pull upwards on the brush to remove it.

To reassemble your device, follow these instructions in reverse order. La versión más reciente de este documento fue generada en 2017-08-28 02:07:31 PM .

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 4 de 4