Campbell Hausfeld FP204800 Thumb Screw Drain

Campbell Hausfeld FP204800 Thumb Screw. Drain Replacement. Replace the thumb screw drain so that excessive condensation does not accumulate inside ...
NAN Größe 0 Downloads 0 vistas
Campbell Hausfeld FP204800 Thumb Screw Drain Replacement

Campbell Hausfeld FP204800 Thumb Screw Drain Replacement Replace the thumb screw drain so that excessive condensation does not accumulate inside the compressor.

Escrito por: Eric

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 1 de 3

Campbell Hausfeld FP204800 Thumb Screw Drain Replacement

INTRODUCCIÓN In order to complete this repair properly, you will need teflon tape to seal the threads of the thumb screw drain. Although this step seems unnecessary in some cases, it will make your compressor run more efficiently without excessive starting and stopping. The replacement of thumb screw drain is straightforward.

HERRAMIENTAS: Teflon tape (1) Smart Wrench (1)

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 2 de 3

Campbell Hausfeld FP204800 Thumb Screw Drain Replacement

Paso 1 — Remove Thumb Screw Drain 

Remove the thumb screw drain from the bottom of the compressor using a Smart Wrench.

 The thumb screw may not easily be removed due to corrosion.

Paso 2 — Apply Teflon Tape 

Apply teflon tape to the replacement thumb screw drain.

 The teflon tape should be wound tightly around the entire threaded portion of the thumb screw drain.

 When you reassemble the thumb screw drain on the compressor, make sure to fully tighten it using a Smart Wrench.

To reassemble your device, follow these instructions in reverse order. La versión más reciente de este documento fue generada en 2017-09-25 10:32:01 PM .

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 3 de 3