Audio Technica ATH-AD500 3-D Wings Replacement

Remove the 3-D wing by pushing down on the bar which the wing is connected to while simultaneously pushing up on the wing.. Audio Technica ATH-AD500 ...
335KB Größe 0 Downloads 0 vistas
Audio Technica ATH-AD500 3-D Wings Replacement

ID de guía: 12856 - Borrador: 2014-01-28

Audio Technica ATH-AD500 3-D Wings Replacement If your headphones are not staying on due to damaged 3-D wings, replace the 3-D wings.

Escrito por: Melanie Reis

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 1 de 3

Audio Technica ATH-AD500 3-D Wings Replacement

ID de guía: 12856 - Borrador: 2014-01-28

INTRODUCCIÓN This installation guide will help you replace the 3-D wings.

PARTES: Replacement 3-D wing (1)

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 2 de 3

Audio Technica ATH-AD500 3-D Wings Replacement

ID de guía: 12856 - Borrador: 2014-01-28

Paso 1 — 3-D Wings



Remove the 3-D wing by pushing down on the bar which the wing is connected to while simultaneously pushing up on the wing.

To reassemble your device, follow these instructions in reverse order. La versión más reciente de este documento fue generada en 2019-08-26 01:02:22 AM .

© iFixit — CC BY-NC-SA

es.iFixit.com

Página 3 de 3